Table of Contents
Advertisement
10-2
INSTALLATION OF CAR SEAT IN POSITION FORWARD FACING
Using: ISOFIX + SUPPORT LEG
HEIGHT OF CHILD: 76-105 cm
17
1. Lift the seat, open the support leg (17) and rotate it at 90°.
2. Place the car seat on vehicle seat, install ISOFIX attachments (15), fix the support leg to the floor and
rotate the seat at 90° (14), so that it faces you.
3. Place the child in car seat, pull and lock the 5-point safety harness. Press the lever (14) and rotate the
seat, so that it faces the motion (child is FORWARD facing).
ATTENTION! Do not rotate the seat at 90°, while vehicle is in motion!
4. Installed car seat in vehicle.
10-3
HEIGHT OF CHILD: 105-150 cm
INSTALLATION OF CAR SEAT IN POSITION FORWARD FACING
Using: 3-point vehicle belt + ISOFIX
17
1
1. Store the support leg (17) under the base.
2. Install ISOFIX attachments (15) to ISOFIX slots at vehicle. Place the child in car seat and set the
height of head support according to child's height. Pull the 3-point belt of vehicle. Thread the diagonal
belt through the guide of head support (2), and the lap belt through the guide of base (9) and lock them
into the vehicle buckle.
ATTENTION! Make sure the belt snugs well the child's pelvis and it is not loose or twisted!
15
14
click
7
click
15
9
10
diagonal belt
lap belt
2
Advertisement
Table of Contents
