Motorola Symbol MicroKiosk MK22 0 Series Reference Manual page 71

Device Activity Management (Sleep/Wake-up Functionality)
Use the Device Activity Manager to manage the device usage profile and lifecycle by turning on/off the scan engine
laser and the display backlight. Set the sleep and wake-up times by day, weekday, weekend, etc.
NOTE It is strongly advised to use the Device Activity Management functionality.
If the Device Activity Manager (DAM) puts the scan engine and/or backlight into sleep mode, these subsystems
repower (wake up) upon the following events:
•
a button press
•
a display touch.
The DAM only checks whether to turn devices on or off when the Inactivity Application Timeout expires. If a device
wakes up due to user input (a "wakeup"), it remains awake regardless of user input until another timeout expires,
then goes back to sleep.
To use the DAM without the Inactivity Application Manager, configure the Inactivity Application Timeout to the
default wakeup time and set the Inactivity Application parameter to nothing.
NOTE Use the RDM or System Menu to set up the Device Activity Manager. Enter valid values to all DAM
parameters (see
the Inactivity Application.
Printing
The MK22X0 supports printing text, bar codes, and bitmaps in the following environments:
•
Browser applications
•
C/C++ applications
•
C# applications
•
Visual Basic.NET applications.
The MK22X0 transmits data to a printer using an RS-232 serial or USB connection. RS-232 serial port settings
(port, stop bits, data bits, parity) are shared with the tethered scanner.
settings for the following printers:
•
Zebra QL (QL320, Cameo, Encore)
•
Zebra EPL Series (LP/TLP 2824, LP/TLP 2844, TLP 3842)*
•
Zebra ZPL (LP/TLP 2844-Z, TLP 3844-Z)
•
Epson TML90
•
Epson TMT88III.
* Zebra LP printers ship in Gap mode. If using a printer in Continuous Paper mode, the autosense does not work
and you must manually set the gap to zero. To avoid this, send a command to the printer to change the mode.
Refer to the Zebra printer documentation.
page 3-11). Otherwise the system rejects the input values and the DAM does not invoke
Configuration 3 - 19
Table 3-5 contains the default baud rate