Motorola Symbol MicroKiosk MK22 0 Series Reference Manual page 48

2 - 16 MK22X0 Series MicroKiosk for CE .NET 4.2 Product Reference Guide
Remove the three screws shown in
2.
Retain only the screw from the protective cover. Two new (longer) screws are provided with the MSR.
Remove Screws (3)
Removing the Cover and Screws
Figure 2-10
CAUTION
Connect the MSR cable to the MK22X0.
3.
Connecting the MSR Cable to the MK22X0
Figure 2-11
Figure 2-10
When removing an access cover, follow proper ESD precautions to avoid damaging sensitive
components. These precautions include, but are not limited to, working on an ESD mat and ensuring
that the operator is properly grounded. Failure to apply proper ESD precautions can damage the
MK22X0 and void the warranty.
Connect
Cable
from the back of the MK22X0 and remove the protective cover.
Protective Cover