Full Gauge Controls Microsol RST Advanced c-o-n-n-e-c-t Manual page 6

Position the electrical connection protection
cover and secure it with the screw (included in
5
the package).
12. WARRANTY AND ENVIRONMENT
ENVIRONMENTAL INFORMATION
PACKAGE:
The materials used in the packaging of Full Gauge products are 100% recyclable. Try to
dispose of it through specialized recycling agents.
PRODUCT:
The components used in Full Gauge controllers can be recycled and reused if
disassembled by specialized companies.
DISPOSAL:
Do not burn or dispose of household controllers that reach the end of their life. Obey
existing legislation in your region regarding the disposal of electronic waste. If in doubt,
contact Full Gauge Controls.
The products manufactured by Full Gauge Controls after May 2005, have a warranty period
of 10 (ten) years directly with the factory and 01 (one) year with accredited resellers, counted
from the date of sale included on the invoice. After this year with resellers, the guarantee will
continue to be valid if the instrument is sent directly to Full Gauge Controls. The products are
guaranteed in case of manufacturing failure that makes them unsuitable or improper for the
applications for which they are intended. The warranty is limited to the maintenance of
instruments manufactured by Full Gauge Controls, disregarding other types of expenses, such
as indemnity due to damage caused to other equipment.
EXCEPTIONS TO WARRANTY
The warranty does not cover transport and/or insurance costs for sending products with
defects or malfunctions to Technical Assistance. The following events are also not covered:
natural wear of parts, external damage caused by drops or improper packaging of products.
The product will automatically lose its warranty if:
- The instructions for use and assembly contained in the technical description and the
installation procedures present in Standard NBR5410 are not observed;
- It is subjected to conditions beyond the limits specified in its technical description;
- It is violated or repaired by a person who is not part of Full Gauge's technical team;
- The damage is caused by a fall, blow and/or impact, water infiltration, overload and/or
atmospheric discharge.
To take advantage of the warranty, the customer must send the product properly packed,
together with the corresponding purchase invoice, to Full Gauge Controls. Shipping costs for
products are borne by the customer. It is also necessary to send as much information as
possible regarding the detected defect, allowing us to streamline the analysis, testing and
execution of the service.
These procedures and the eventual maintenance of the product will only be carried out by
Full Gauge Controls' Technical Assistance, at the Company's headquarters - Rua Júlio de
Castilhos, 250 - CEP 92120-030 - Canoas - Rio Grande do Sul - Brazil.
Copyright 2022
LOSS OF WARRANTY
WARRANTY USE
All rights reserved.