Post-Connection Check - Endress+Hauser Cerabar M PMC51 Operating Instructions Manual

Cerabar M Analog
Endress+Hauser
4.5

Post-connection check

Perform the following checks after completing electrical installation of the device:
• Does the supply voltage match the specifications on the nameplate?
• Is the device connected as per Section 4.1?
• Are all screws firmly tightened?
• Is the housing cover screwed down tight?
As soon as voltage is applied to the device, the green LED on the electronic insert lights up for a few
seconds or the connected local display lights up.
Wiring
23