Return; Disposal; Software History - Endress+Hauser Cerabar M PMC51 Operating Instructions Manual

Cerabar M Analog
Endress+Hauser
8.6

Return

Before you send in a device for repair or inspection:
• Remove all signs of media, paying particular attention to seal grooves and gaps in which media
can become lodged. This is particularly important if the medium is hazardous to health. See also
"Declaration of Hazardous Material and Decontamination" (see penultimate page).
Please enclose the following when returning the device:
• The duly completed and signed "Declaration of Hazardous Material and Decontamination" (see
penultimate page).
Only then is it possible for Endress+Hauser to inspect or repair the returned device.
• The chemical and physical properties of the medium.
• A description of the application.
• A description of the error which occurred.
• Special instructions on handling, if necessary, e.g. safety data sheet as per EN 91/155/EEC.
8.7

Disposal

When disposing, separate and recycle the device components based on the materials.
8.8

Software history

Date Software Software modifications
version
10.2009 01.00.zz Original software.
Documentation
CD-ROM Operating Instructions
CD512P/00/A2/10.09 BA385P/00/EN/10.09
71103445 71102503
Troubleshooting
31