Shield Region
The shield region allows you to set the specific region in which the behavior analysis
will not function. Up to 4 shield regions are supported.
Steps:
1. Click Shield Region tab to enter the shield region configuration interface.
2. Click Draw Area. Draw area by left click end-points in the live view window,
and right click to finish the area drawing.
Notes:
Polygon area with up to 10 sides is supported.
Click Delete to delete the drawn areas.
If live view is stopped, there is no way to draw the shield regions.
Explosion Proof Network IP Camera User Manual
Figure 6-69 Draw on Live View Window
111