Advertisement
Quick Links
Optical & Digital Zoom - IP67 - 120/240 - Stranded Wire Signal
Thank you for your purchase of the Larson Electronics IDCMR-ALG-OZ-IC-1080P analog security camera.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. CRITICAL
SAFETY INSTRUCTIONS:
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY RELEVANT
LOCAL BUILDING CODES.
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF ELECTRICAL SYSTEMS. IF NOT QUALIFIED,
CONTACT A QUALIFIED ELECTRICIAN.
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE RATED FIXTURE'S VOLTAGE.
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP OBJECTS. SUITABLE
FOR DAMP LOCATIONS.
The IDCMR-ALG-OZ-IC-1080P-1227 Security Camera from Larson Electronics is designed for discreet monitoring and
remote observation in both indoor and outdoor extreme temperature environments. This 1080p HD high resolution security
camera features a 150` range, 10x optical zoom with autofocus, and 62x digital zoom for maximum coverage and
accuracy. The monitoring device operates on 24V AC or 12V DC (remote mount power supply for operating on native high
voltage is available separately). A digital inverter supports both HD-TVI and CVBS analog output.
Larson Electronics, LLC
1080p HD Analog Security Camera
Instruction Manual
Phone:
(877) 348-9680
Fax: (903) 498-3364
IDCMR-ALG-OZ-IC-1080P
www.larsonelectronics.com
1 of 6
Advertisement
Related Manuals for Larson Electronics IDCMR-ALG-OZ-IC-1080P
Summary of Contents for Larson Electronics IDCMR-ALG-OZ-IC-1080P
- Page 1 Optical & Digital Zoom - IP67 - 120/240 - Stranded Wire Signal Instruction Manual Thank you for your purchase of the Larson Electronics IDCMR-ALG-OZ-IC-1080P analog security camera. WARNING: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. CRITICAL...
- Page 2 Connect the other end of the power extension cable to a 12 Vdc power source. Observe the polarity of the cable shown in the photo on page 1 of this guide. Step 2. Camera adjustments Apply power to the camera. 2 of 6 Phone: Fax: (903) 498-3364 www.larsonelectronics.com (877) 348-9680 Larson Electronics, LLC...
- Page 3 Menu icon In the PTZ Control panel pop-up window, click the Menu icon on the line. Phone: Fax: (903) 498-3364 www.larsonelectronics.com 3 of 6 (877) 348-9680 Larson Electronics, LLC...
- Page 4 Click the button to position the > marker at EXIT, and then click the Iris + button to open the ID DISPL LANGUAGE FACTORY CAM ID EXIT submenu. NAME DISPL INIT EXIT SAVE/ EXIT EXIT Phone: Fax: (903) 498-3364 www.larsonelectronics.com 4 of 6 (877) 348-9680 Larson Electronics, LLC...
-
Page 5: Troubleshooting
The camera is not working properly and the - Verify that the camera is correctly connected to an appropriate regulated surface of the camera is hot. power source. If necessary,change the camera position. Phone: Fax: (903) 498-3364 www.larsonelectronics.com 5 of 6 (877) 348-9680 Larson Electronics, LLC... -
Page 6: Maintenance
Larson Electronics. THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT SALES@LARSONELECTRONICS.COM OR BY PHONE AT 1-877-348-9680 FOR FURTHER ASSISTANCE.