Maintenance; Rebooting The Camera; Restoring Default Settings - Larson Electronics ATEX-EXPCMR-IP-POE-2MPIR-108D Quick Installation Manual

12.7 Maintenance

12.7.1 Rebooting the Camera

Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance:
2. Click Reboot to reboot the network camera.

12.7.2 Restoring Default Settings

Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click Restore or Default to restore the default settings.
User Manual of Network Camera
Figure 12-11 Device Information
Figure 12-12 Reboot the Device
155