Chapter 6 Network Camera; Configuring Local Parameters - Larson Electronics ATEX-EXPCMR-IP-POE-2MPIR-108D Quick Installation Manual

Chapter 6 Network Camera

6.1 Configuring Local Parameters

Note: The local configuration refers to the parameters of the live view, record files
and captured pictures. The record files and captured pictures are the ones you record
and captured using the web browser and thus the saving paths of them are on the PC
running the browser.
Steps:
1. Enter the Local Configuration interface:
Configuration > Local Configuration
2. Configure the following settings:

Live View Parameters: Set the protocol type and live view performance.
 Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.
TCP: Ensures complete delivery of streaming data and better video quality,
yet the real-time transmission will be affected.
Explosion Proof Network IP Camera User Manual
Configuration
Figure 6-1 Local Configuration Interface
41