Care & Maintenance - Jetson Light Rider 20 User Manual

Care & Maintenance
CLEANING THE JETSON LIGHT RIDER
·
CAREFULLY WIPE WITH A DAMP CLOTH AND THEN DRY WITH A DRY CLOTH.
· DO NOT APPLY WATER DIRECTLY TO THE JETSON LIGHT RIDER. THIS CAN CAUSE DAMAGE TO THE FRAME AND
ELECTRICAL SYSTEMS, WHICH CAN RESULT IN MALFUNCTIONS THAT LEAD TO PERSONAL INJURY.
STORING THE JETSON LIGHT RIDER
·
REMOVE BATTERIES BEFORE STORING.
· COVER TO PROTECT AGAINST DUST.
· STORE INDOORS AND IN A DRY PLACE.
ADJUSTING THE CHAIN:
WHEN THE CHAIN (C) IS AT THE CORRECT TIGHTNESS, THE CRANK CAN ROTATE FREELY AND THE CHAIN CAN BE
PULLED NO MORE THAN ONE-HALF INCH (A) AWAY FROM A STRAIGHTEDGE (B), AS SHOWN.
·
IF TOO TIGHT, THE BICYCLE WILL BE DIFFICULT TO PEDAL.
· IF TOO LOOSE, THE CHAIN CAN COME OFF THE SPROCKETS.
TO ADJUST THE CHAIN:
· LOOSEN THE AXLE NUTS OF THE REAR WHEEL.
· MOVE THE REAR WHEEL FORWARD OR BACKWARD AS NECESSARY.
IMPORTANT: MAKE SURE THE REAR WHEEL IS CENTERED UNDER THE BICYCLE FRAME.
· HOLD THE WHEEL IN THE DESIRED POSITION AND TIGHTEN THE AXLE NUTS.
WARNING:
DO NOT ATTEMPT TO REPAIR A BROKEN CHAIN. IF YOUR CHAIN
BRAKES, BRING YOUR BICYCLE TO A BICYCLE SERVICE SHOP.
C
CRANK
B
A
51