Assembling The Front Brake - Jetson Light Rider 20 User Manual

Assembling the Front Brake

1.5
NOTE: YOU MAY NEED ANOTHER SET OF HANDS TO GET
THE FRONT BRAKE CONNECTED. (GRAB AN ASSISTANT!)
1. LOOSEN BUT DO NOT REMOVE THE CABLE ANCHOR NUT ON THE
FRONT BRAKE CALIPER BY TURNING IT COUNTERCLOCKWISE
WITH THE 10 MM WRENCH.
2. POSITION THE CALIPER OVER THE WHEEL SUCH THAT THE TOP
OF THE CALIPER IS CENTERED OVER THE WHEEL, AND THE BRAKE
PADS ARE:
· PARALLEL WITH ONE ANOTHER.
· ALIGNED WITH THE TIRE RIM.
· EVENLY SPACED FROM THE TIRE RIM.
22
CABLE
CABLE
ANCHOR NUT
10MM WRENCH
CALIPER ARMS
PADS
TIRE RIM