Related Manuals for Jetson Light Rider 12
Summary of Contents for Jetson Light Rider 12
- Page 1 Light Rider (JLR) 12" Kids Light-Up Bicycle. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODEL: JLRG12-RGR U.S. Patent No. 11,155,315 Designed in Brooklyn | Made in China...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
- Page 4 Online Resources Scan for our most updated Jetson Light Rider 12" onboarding materials and support resources. WARNING FAILURE TO COMPLY WITH THE FOLLOWING INSTRUCTIONS MAY RESULT IN INJURY TO THE CHILD OR OTHERS. • KEEP SMALL PARTS AWAY FROM CHILDREN DURING ASSEMBLY.
-
Page 5: Table Of Contents
Helmet Safety ........................30 Riding the Jetson Light Rider 12" ...................31 Care & Maintenance... -
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 • Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death. • If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team. • Replace worn or broken parts immediately.
- Page 8 ONE-YEAR GENERAL LIMITED WARRANTY All new Jetson products are warranted against defects in materials and workmanship for a period of one year from the date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support).
-
Page 9: Safety Checklist
Safety Checklist BEFORE EVERY RIDE, CONDUCT THESE IMPORTANT SAFETY CHECKS. BRAKES • CHECK THE BRAKE IS IN GOOD WORKING ORDER. • CHECK THAT THE COASTER BRAKE IS ACTIVATED WHEN THE PEDALS ARE ROTATED BACKWARDS AND THAT THE BRAKE IS IN WORKING ORDER. MAKE SURE THAT THE AXLE IS LUBRICATED TO FACILITATE MOVEMENT. STEERING •... -
Page 10: What's In The Box
What’s in the Box 1. BIKE FRAME 2. FRONT WHEEL 3. HANDLEBAR 4. BELL 5. SEAT 6. PEDALS (2X) 7. TRAINING WHEELS (2X) TOOL INCLUDED: DOUBLE-SIDED WRENCH * ADULTS MUST ASSIST CHILDREN IN THE ASSEMBLY AND INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT. -
Page 12: Specs & Features
Specs & Features • PRODUCT DIMENSIONS: 35.4” × 20.4” × 30.0” • BRAKE TYPE: COASTER BRAKE • PRODUCT WEIGHT: 17.1 LBS • WEIGHT LIMIT: 80 LBS • TIRE SIZE: 12 IN • RECOMMENDED AGE: 3+ • BATTERIES NEEDED: 3 AA (NOT INCLUDED) Correct Frame Size inches FOR SAFE AND COMFORTABLE RIDING, THERE SHOULD... -
Page 14: Training Wheels Assembly
WASHER AXLE NUT 1. Getting Started Training Wheels Assembly • USING THE WRENCH, REMOVE AXLE NUT & WASHER FROM ONE SIDE OF THE BIKE’S REAR WHEEL. - Page 15 TRAINING WHEEL • PLACE TRAINING WHEEL BRACKET ONTO THE AXLE. • PLACE WASHER AND TWIST AXLE NUT ONTO WHEEL BRACKET.
- Page 16 TIGHTEN • REPEAT ON THE OTHER SIDE OF THE BICYCLE. ONCE BOTH BRACKETS ARE CONNECTED, USE THE WRENCH TO TIGHTEN THE NUTS AND SECURE THE TRAINING WHEELS IN PLACE.
-
Page 17: Front Wheel Assembly
Front Wheel Assembly USING THE WRENCH, LOOSEN THE NUTS ON BOTH SIDES OF THE FRONT WHEEL. REMOVE THE NUTS AND THE WASHERS UNDERNEATH THEM. SET ASIDE. - Page 18 FRONT FORK LEGS AXLE • PLACE WHEEL BETWEEN THE FRONT FORK LEGS SO THAT THE ARROW ON THE TIRE IS POINTING FORWARD. • MAKE SURE THE WHEEL IS CENTERED AND THAT THE AXLE FITS INTO THE WEDGES OF THE FORK LEGS.
- Page 19 WASHER HOOK HOLE TIGHTEN NUTS ON BOTH SIDES. • REPLACE THE WASHER, POSITIONING IT SO THAT ITS HOOK IS INSERTED IN THE HOLE ON THE FORK. • REPLACE NUT AND TIGHTEN USING WRENCH. • REPEAT ON THE OTHER SIDE OF THE AXLE.
-
Page 20: Handlebar Assembly
Handlebar Assembly • USING THE WRENCH, LOOSEN THE CAP BOLT. • INSERT HANDLEBAR INTO STEM POST. • ADJUST HEIGHT TO SUIT THE SIZE OF THE RIDER. CAP BOLT PLACE HANDLEBAR INTO STEM POST. - Page 21 TIGHTEN CAP BOLT USING WRENCH.
-
Page 22: Seat Assembly
Seat Assembly • OPEN THE SEAT CLAMP LEVER. • SLIDE THE SEAT INTO THE SEAT POST. • MAKE SURE THE SEAT IS INSERTED PAST THE MINIMUM INSERTION MARK SO THAT THE MARK IS NOT VISIBLE. • CLOSE THE SEAT CLAMP LEVER AND TIGHTEN THE CLAMP BY ROTATING THE KNOB ON THE CLAMP. PLACE SEAT INTO SEAT POST. - Page 23 • ADJUST HEIGHT TO SUIT THE SIZE OF THE RIDER. SEAT CLAMP LEVER CLAMP KNOB...
- Page 24 MAKE SURE SEAT CLAMP IS SECURED AND SEAT IS STABLE.
-
Page 25: Pedals Assembly
Pedals Assembly • SLIDE PEDAL MARKED "R" INTO THE RIGHT-HAND CRANK ARM. - Page 26 • HAND TIGHTEN SPINDLE ON PEDAL MARKED "R" BY ROTATING IT CLOCKWISE. • REPEAT WITH PEDAL MARKED "L", TIGHTENING IT BY ROTATING IT COUNTER-CLOCKWISE.
- Page 27 CAUTION: STOP TIGHTENING IF YOU FEEL RESISTANCE WHEN PUTTING ON THE PEDALS. IT COULD MEAN THE SPINDLE IS ENTERING THE CRANK ARM AT AN ANGLE. TIGHTEN • ONCE BOTH PEDALS ARE ON, TIGHTEN WITH WRENCH.
-
Page 28: Battery Insertion
BATTERY COMPARTMENT 2. Using the LED Lights Battery Insertion • GENTLY PUSH AND TWIST BATTERY COMPARTMENT COUNTER CLOCKWISE TO UNLOCK. • INSERT 3 AA BATTERIES ACCORDING TO THE DIRECTIONS MARKED ON THE INSIDE OF THE BATTERY COMPARTMENT. - Page 29 TWIST CLOCKWISE TO LOCK. • REINSERT BATTERY COMPARTMENT. GENTLY PUSH AND TWIST CLOCKWISE, UNTIL YOU FEEL THE BATTERY COMPARTMENT LOCK INTO PLACE.
-
Page 30: Activating The Lighting
Activating the Lighting • HOLD POWER BUTTON FOR 1 -2 SECONDS TO TURN ON/OFF. • HOLD LIGHTING MODE BUTTON FOR 3 SECONDS TO TOGGLE BETWEEN MULTIPLE LIGHTING PATTERNS. • TO CHANGE LIGHT COLORS WITHIN A LIGHTING PATTERN, QUICK-PRESS LIGHTING MODE BUTTON. PLEASE NOTE: TO PRESERVE BATTERY POWER, LIGHTS WILL AUTOMATICALLY TURN OFF AFTER 10 MINUTES. -
Page 31: Operating The Coaster Brake
3. Making Moves Operating the Coaster Brake • PEDAL IN REVERSE TO ENGAGE COASTER BRAKE. • THE FASTER YOU PEDAL BACKWARDS, THE QUICKER THE BRAKING ACTION OF THE COASTER BRAKE WILL BE. -
Page 32: Helmet Safety
Helmet Safety PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 33: Riding The Jetson Light Rider 12
Riding the Jetson Light Rider 12" NOW THAT YOU HAVE YOUR JETSON LIGHT RIDER 12" SAFELY ASSEMBLED, IT’S TIME TO RIDE OUT AND LIGHT UP THE WORLD. PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT. -
Page 34: Care & Maintenance
• Carefully wipe with a damp cloth, then dry with a dry cloth. • Do not apply water directly to the Jetson Light Rider 12". This can cause damage to the frame and electrical systems, which can result in malfunctions that lead to personal injury. - Page 35 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 36 Date Code: 10/2022 Document Edition: v1.0 © 2023, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.
Need help?
Do you have a question about the Light Rider 12 and is the answer not in the manual?
Questions and answers