Getting Started; Starting Notes - Jetson Light Rider 20 User Manual

1. Getting Started

Starting Notes

1.1
· REMOVE ALL PACKAGING PIECES BEFORE BEGINNING ASSEMBLY: AT THE BASE OF THE FRONT FORK AND HANDLEBAR
STEM, ON THE SEAT CLAMP AND WHEEL AXLES, ETC.
· OUR JETSON LIGHT RIDER 20 BIKES HAVE EVOLVED OVER THE YEARS, AND THIS USER MANUAL APPLIES TO ALL
VERSIONS. CERTAIN NOTES AND INSTRUCTIONS ARE ONLY APPLICABLE TO SOME VERSIONS AND ARE
INDICATED AS SUCH.
· THE DIRECTIONS GIVEN IN THIS MANUAL—RIGHT, LEFT, FRONT/FORWARD, AND REAR/BACK—ARE ORIENTED AS THE
RIDER WOULD SEE THEM WHEN SEATED ON THE BIKE. THE "RIGHT SIDE" OF THE BIKE, FOR EXAMPLE, IS THE SIDE WHERE
THE RIDER'S RIGHT HAND AND FOOT WILL BE.
· IT IS HELPFUL TO HAVE AN EXTRA SET OF HANDS TO HELP WITH ASSEMBLY. GRAB AN ASSISTANT!
·
IF YOU HAVE PURCHASED YOUR BIKE PRE-ASSEMBLED, CHECK ALL PARTS OUTLINED IN SECTION 1 ("GETTING STARTED")
TO SEE THAT THEY HAVE BEEN ASSEMBLED AND SET UP PROPERLY. MAKE ANY NECESSARY ADJUSTMENTS PRIOR TO
RIDING AND CONDUCT ALL PRE-RIDE SAFETY CHECKS.
SCAN HERE TO FAST-TRACK TO OUR QUICK START GUIDE FOR PRE-ASSEMBLED BIKES:
13