Related Manuals for Jetson Bolt Up
Summary of Contents for Jetson Bolt Up
- Page 1 Bolt Up Folding Electric Bike. A guide for your ride. IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY MODEL: JBLTUP-BLK Designed in Brooklyn | Made in China...
- Page 3 Remember to be safe and, most importantly, have fun!
-
Page 5: Table Of Contents
.........................14 Unfolding the Handlebar ....................15 Operating the Bolt Up .......................17 Helmet Safety . -
Page 6: Safety Warnings
That the braking system is functioning properly; That any and all Bolt Up guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition;... - Page 7 For more information go to www.p65warnings.ca.gov/product MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from Jetson Customer Care. This will void any warranty, and can lead to malfunctions which may cause injury.
-
Page 8: What's In The Box
What’s in the Box 1. FRONT TIRE 9. REAR FENDER 2. HEADLIGHT 10. REAR TIRE 3. RELEASE LEVER 11. KICKSTAND 4. HANDLEBAR 12. FOOT REST 5. CARRYING HANDLE 13. FRONT FENDER 6. SEAT 14. CHARGER 7. TAILLIGHT 15. CHARGING CABLE 8. - Page 9 PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 10: Specs & Features
Specs & Features • PRODUCT UNFOLDED DIMS: 46.5” × 19.3” × 38.6” • MOTOR: 350W • PRODUCT FOLDED DIMS: 46.5” × 19.3” × 23” • MAX SPEED: UP TO 15.5 MPH • PRODUCT WEIGHT: 41 LB • MAX RANGE (TWIST THROTTLE): UP TO 15 MILES •... -
Page 11: Safety Checklist
Safety Checklist IT’S ALWAYS IMPORTANT TO DO A FEW, BUT IMPORTANT, SAFETY CHECKS BEFORE EVERY RIDE. LET’S GO THROUGH THEM: BRAKES CHECK THE BRAKE IS IN GOOD WORKING ORDER. STEERING CHECK THAT THE HANDLEBAR, LATCH AND STEM ARE SECURELY TIGHTENED. FOOT RESTS CHECK THAT THE FOOT RESTS ARE SECURELY TIGHTENED. -
Page 12: Attaching The Seat
1. Get Started Attaching the Seat • LOOSEN THE KNOB AND OPEN THE SEAT CLAMP. • INSERT SEAT POST INTO SEAT TUBE AND SLIDE TO DESIRED HEIGHT. SEAT CLAMP • TURN THE KNOB CLOCKWISE TO TIGHTEN, THEN CLOSE THE SEAT CLAMP. KNOB... - Page 13 • MAKE SURE SEAT CLAMP IS SECURED AND SEAT IS STABLE.
-
Page 14: Foot Rests Assembly
Foot Rests Assembly • INSTALL FOOT RESTS TO BOLT UP. TURN FOOT RESTS CLOCKWISE TO TIGHTEN. FOOT REST... -
Page 15: Attaching The Rear Fender
Attaching the Rear Fender • REMOVE BOLT AND NUT FROM THE FRAME. • RUN THE BOLT THROUGH THE FENDER AND FRAME, AND SECURE USING THE NUT BOLT REAR FENDER... -
Page 16: Stay Charged
• ONLY USE THE INCLUDED CHARGER • PLUG THE CHARGER INTO THE WALL BEFORE THE CHARGING PORT • DON’T TURN ON THE BOLT UP WHILE IT’S CHARGING • CHARGE THE BATTERY UNTIL IT IS FULLY CHARGED - UP TO 4 HOURS •... -
Page 17: Unfolding The Handlebar
2. Make Moves Unfolding the Handlebar SLOWLY LIFT THE HANDLEBARS UP... - Page 18 • LOCK THE RELEASE LEVER BY LIFTING IT UP UNTIL IT CLICKS. • NOW LATCH THE LOCKING LEVER ONTO THE RELEASE LEVER. CHECK THAT BOTH LEVERS AND HANDLEBAR ARE SECURE. • TO FOLD, UNLOCK THE RELEASE LEVER AND LATCH. LOCKING LEVER RELEASE LEVER...
-
Page 19: Operating The Bolt Up
• PRESS ONCE TO ACTIVATE CRUISE CONTROL • HOLD BUTTON FOR 4 SECONDS TO TURN LIGHT ON/OFF BATTERY LEVELS: • 4 LIGHTS: 76-100% POWER • 3 LIGHTS: 51-75% POWER • 2 LIGHTS: 26-50% POWER • 1 LIGHT: 1-25% POWER (PLEASE CHARGE THE BOLT UP IMMEDIATELY!) -
Page 20: Helmet Safety
Helmet Safety THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. COULD CAUSE SERIOUS INJURY. -
Page 21: Riding The Bolt Up
Riding the Bolt Up KICKSTAND • BEFORE EACH RIDE, CHECK THAT THE HANDLEBAR AND SEAT ARE SECURE, THE TIRE PRESSURE IS SUFFICIENT, AND THE BRAKE SYSTEM WORKS CORRECTLY. • KEEP YOUR FEET ON THE FOOT RESTS. DO NOT RIDE WITH YOUR FEET DANGLING OVER THE SIDES AND ALWAYS STAY SEATED WHILE RIDING. -
Page 22: Care And Maintenance
• Carefully wipe with a damp cloth, then dry with a dry cloth. • Do not use water to clean the Bolt Up, as the electrical and electronic systems may get wet, resulting in personal injury or malfunction of the Bolt Up. - Page 23 Enjoying the ride? Leave a review on ridejetson.com/reviews or share your photos with us online using the #RideJetson hashtag! Follow us @ridejetson #MakeMoves...
- Page 24 Questions? Let us know. support.ridejetson.com Hours of Operation: 7 Days a Week, 10am-6pm Manufactured in Shenzhen, China. Imported by Jetson Electric Bikes LLC. 86 34th Street 4th Floor, Brooklyn, New York 11232 www.ridejetson.com Made in China Date Code: 06/2021...
Need help?
Do you have a question about the Bolt Up and is the answer not in the manual?
Questions and answers
We just got this bolt and it has 3 bars on the charge and you have to pedal because it feels like its needs a charge. Is this normal.