Huawei SmartACU2000D Quick Manual page 24

6.9 (Optional) Connecting the Peripheral Network Cable
Connect peripheral network cables to ports FE2–FE5 on the Ethernet switch. All network cables
are connected in the same way. This section describes how to connect one network cable.
1. Prepare a network cable.
8
1
8
7
6
5
4
3
2
1
(1) White-
and- (2) Orange
orange
(5) White-
(6) Green
and-blue
2. Verify that the network cable functions properly using a network
cable tester.
3. Connect the peripheral network cable to the FE2 port on the
Ethernet switch.
4. Bind the network cable.
(Optional) Connecting the DC Output Power Cable to the 24 V
6.10
Power Module
1. Prepare a cable.
2. Connect the cable to the 24V OUT+ and 24V OUT- ports on the power module.
3. Bind the cable.
IS01Z00009
(3) White-and-
(4) Blue
green
(7) White-and-
(8) Brown
brown
23