Huawei SmartACU2000D Quick Manual page 16

5. Connect the GE4 port on the SmartModule to the LAN port on the SmartLogger using the
network cable delivered with the SmartModule.
6. Connect the preinstalled RS485 cable to the COM port on the SmartModule based on the label.
7. Connect the preinstalled power cable to the 12V 1A port on the SmartModule based on the
cable label.
(Optional) Installing the Ethernet Switch
5.3
1. Remove the panel
from the Ethernet
switch installation
position.
2. Secure the Ethernet
switch.
3. Connect the PE cable
for the Ethernet
switch.
15