Huawei SmartACU2000D Quick Manual page 15

5.1 Installing the PoE Module
1. Loosen screws and remove the mounting board. Do not remove the screws.
2. Remove screws from the PoE module installation position.
3. Secure the PoE module. (The indicators should be in the lower left corner).
4. Secure the mounting board.
5.2 5.2
(Optional) Installing the SmartModule
1. Remove the mounting ears and guide rail–mounting kit from the SmartModule.
2. Remove the panel at the position where the SmartModule is to be installed from the cabinet
and take out the mounting kit.
3. Secure the mounting bracket to the SmartModule.
4. Install the SmartModule.
14