6.2.2
Pulses Output
The pulse output is fully configurable using ParamApp as shown in the table below:
Compensation mode: Compensated pulse output (return volume pulses are compensated by
suppressing the same number of forward volume pulses).
Mode with direction: Direction of flow (a ground signal corresponds to a negative flow).
Positive/Negative Mode: Allows you to accurately count positive (normal direction) and negative (return
water) water volumes.
2 wires – with compensation
-
Green : PULSE
-
Grey : GND
3 wires – with direction wire
-
Green : PULSE
-
Yellow : DIRECTION
-
Grey : GND
3 wires – Positive/Negative
-
Green : PULSE +
-
Yellow : PULSE –
-
Grey : GND
3 wires – duplicate pulses output
-
Green : PULSE 1
-
Yellow : PULSE 2
-
Grey : GND
15