Table of Contents
Advertisement
INDICATION
If the meter diameter is not specified, the management of Burst, Leak and
Return water alarms is not operational.
INDICATION
The alarm thresholds for Burst, Leak and Return water detection are
automatically updated when the diameter of the meter is changed and are reset
to the default value.
INDICATION
The analysis of the fraud alarm only starts when the module has detected a
volume of water greater than 5 litres.
Additional functions are available such:
-
Set the time,
-
Delete the histories stored in the module,
-
Initialize alarms,
-
Changing predefined alarm values.
Modification of meter diameter
31
Advertisement
Table of Contents
