TANDBERG MPS 200 Administrator's Manual page 171

MPS 200/800
Contents Introduction
:#*;2<1(*2&Q:5&!*D&I95&0#1&589 R
Configuring Microsoft Office Live Communications
Server (LCS) 2005, SP1
This section will illustrate how to setup the Live Communi-
cation Server (LCS) to work properly with the MPS.
Login and Locate the Server
1. Login to the Live Communication Server
2. Open the Live Communication Server snap-in for
MMC.
3. Expand the tree to locate the server you wish the MPS
to use as its home server.
4. Once located right-click on the server's icon and
Properties
select .
5. In the Properties dialog select the Host Authorization
tab to add a new authorized (trusted) host.
Add a Trusted Host
This setup will allow the LCS to authenticate the MPS and
treat it as a trusted host within LCS
1. Select the Host Authorization tab
2. Press the Add... button to add a new authorized host.
3. In the Add Authorized Host window, set the server
IP Address
selection to and enter the IP address of
the System Controller Board of the MPS.
Throttle As Server
4. The selection boxes for
As Authenticated should be checked.
Once the trusted host configuration has been com-
5.
pleted, press OK to save the changes.
D14033.10—APRIL 2009
Getting started Using the MPS
cont...
Treat
and
System status System configuration Gateway configuration
Administrator Guide
MCU configuration Appendices Appendices Contact us
170