Gas Engine - AeroPlus Sbach 342 20CC Manual

www.aeroplusrc.com
#(Sbach 20CC used single horn)

Using the pushrod supplied screw ball joints onto each end. The correct length will leave the aileron lined up to the inner part still attached to the
wing.

Using supplied bolts attach the pushrod at both ends. Check to see you have sufficient movement of the aileron. If not adjust.
#(Sbach 20CC used single horn)

Carry out the same procedure on the other wing.
Gas Engine

From the template that came with the engine, using the cross axis on the engine box mark the mounting holes.

Check the diameter of the required bolts and drill accordingly.
AeroPlus RC Copyright 2013 © All Rights Reserved
service@aeroplusrc.com