Advertisement
www.aeroplusrc.com
Mount the engine with the stand offs to the bulkhead. Remember to use large washers on the inside to spread the load and use plenty of nutlock.
Exhaust options. Depending on the engine many exhaust options are available. Standard muffler, Pitts Exhaust of canister with header.
If using a canister a bracket is already inside the model. Using silicon tubing it will hold the end of the canister.
The front outlet of the canister will pop out of the bottom of the cowl
Cut out the area for the engine cylinder head and the exhaust outlet on a piece of thin card and tape this to the fuselage at one end.
AeroPlus RC Copyright 2013 © All Rights Reserved
service@aeroplusrc.com
Advertisement
