Advertisement
www.aeroplusrc.com
Electric
Assemble the supplied electric motor box and bolt to the engine bulkhead.
Depending on the length of your motor you may need to use the supplied round plywood spacers to achieve the correct length for the motor.
Mount the ESC in airflow on the side of the electric motor mount, using a velco strap.
With the removal of the fuel tank it leaves a large area where the batteries can be mounted.
Switch
On each side of the fuselage near the canopy bolts are areas for switches to be mounted.
RX
A convienient place to mount the RX is just in front of the rudder servo. Ensure that it is mounted on velco and strapped down.
AeroPlus RC Copyright 2013 © All Rights Reserved
service@aeroplusrc.com
Advertisement
