Setup - Central Machinery 59220 Owner's Manual & Safety Instructions

Setup - Before use:
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
turn the power Switch of the tool off and unplug the tool from its electrical outlet
before performing any procedure in this section.
note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Functions
Sanding
Disc
Work table
Lock Lever
Switch with
Safety Key
Safety Switch
Insert the Safety Key into
the Switch. This "Key"
is a safety precaution
and should remain in the
Switch during use and be
removed after Switch is
turned off and/or any time
the Belt/Disc Sander is left
unattended or in storage.
Page 6
Sanding
Belt
Fence
For technical questions, please call 1-888-866-5797.
tracking
Lock
Knob
Miter
Gauge
tracking
Work
table
tool
Stand
Item 59220
Belt
Dial