Introduction; Important Information; Installation Warnings - Lopi ProBuilder 36 CleanFace GSB2 Manual

Hide thumbs Also See for ProBuilder 36 CleanFace GSB2:

Table of Contents

Introduction

We welcome you as a new owner of a ProBuilder GSB2 gas fireplace. This manual details operation and

maintenance of this fireplace. Please familiarize yourself with the Owner's Manual before operating your

heater and save the manual for future reference.

 Installation requirements are printed in the ProBuilder GSB2 Installation Manual. All

requirements in the installation manual must be met.

 Failure to follow all of the requirements may result in property damage, bodily injury,

or even death.

 This heater must be installed by a qualified installer who has gone through a training

program for the installation of direct vent gas appliances.

 This appliance must be installed in accordance with all local codes, if any; if not,

follow ANSI Z223.1 and NFPA 54(88). In Australia follow AS/NZS 5601.1.

 In Manufactured or Mobile Homes must conform with Manufactured Home

Construction and Safety Standard, Title 24 CFR, Part 3280, or, when such a standard

is not applicable, the Standard for Manufactured Home Installations, ANSI/NCSBCS

A225.1. This appliance may be installed in Manufactured Housing only after the

home is site located.

 The fireplace is designed to operate on natural gas, or propane (LP).

 All exhaust gases must be vented outside the structure of the living-area.

Combustion air is drawn from outside the living-area structure.

 Notify your insurance company before hooking up this fireplace.

Table of Contents

No other ProBuilder gas fireplace has the same serial

number as yours. The serial number is on the listing

label that is chained to the gas control valve. This

serial number may be needed in case you require

service.

Model:

Serial Number:

Purchase Date:

Purchased From:

5/4/21 - 1502

ProBuilder 36 CF GSB2____

PB 36 CF Operation (Aust)

Table of Contents