Webui; Using The Webui - Snom 02-132047 User Manual

Sip dect handset
Hide thumbs Also See for 02-132047:
Table of Contents

Advertisement

WebUI

Using the WebUI

Use an Internet web browser to access the Web User Interface (WebUI) that resides
on your base station� After you log on to the WebUI, you can configure the following
features:
Base Preferences
User Preferences
Base Directory
Blocked List
Remote XML directory
User Password
The WebUI also has a System Status, Cordless Registrations, Cordless status and Base
status page, where you can view network status and registration information about
your handsets�
To access the WebUI:
1�
Ensure that your computer is connected to the same network as your base station�
2�
Find the IP address of your base station:
a� When the phone is displaying the idle screen, press the MENU/Confirm key�
b� Press
c� With Status highlighted, press Enter�
d� With Network highlighted, press Enter�
e� Select the desired network protocol, IPv4 or IPv6 and then press Enter�
The IPv4 or IPv6 screen appears:
f� On the IPv4 or IPv6 screen, note the IP Address�
3�
On your computer, open an Internet web browser� Depending on your web browser,
some of the pages presented here may look different and have different controls�
4�
Type the base station's IP address in the web browser address bar and press
ENTER on your computer keyboard:
A Login window appears�
(Settings), and then press OK�
to select
66

Advertisement

Table of Contents
loading

This manual is also suitable for:

M55

Table of Contents