Compressor - Denso MovinCool CLIMATE PRO K63 Service Manual

Compressor

1. Remove the cover of the compressor, and then disconnect the wires: T1 (red), T2 (white) and
T3 (black) by removing the bolts.
T1 (Red)
Bolt (3)
T3 (Black)
T2 (White)
2. Compressor Motor
Check resistance across the terminals: Between terminals at 77 °F (25 °C)
- R - C: Approx. 3.5 ohm
- C - S: Approx. 3.5 ohm
- S - R: Approx. 3.5 ohm
If the measured resistance is not equal to these standard values, replace the compressor.
R (T3)
C (T1)
S (T2)
81
Cover