Denso MovinCool CLIMATE PRO K63 Service Manual page 25

Removal of Panels
7. Remove the two (2) M4 x L10 screws from the
bumper connections, and then remove one
half of the logo side panel.
8. Remove the twelve (12) M6 x L12 screws, and
then remove the other half of the logo side
panel.
9. Remove the ten (10) M6 x L12 screws from
the side and the three (3) M6 x L12 screws
from the rear.
Screw (10)
M6 x L12
25
Bumper Connection
Screw (2)
M4 x L10
Bumper Connection
Screw (12)
M6 x L12
Screw (3)
M6 x L12