Removal Of Louver - Denso MovinCool CLIMATE PRO K63 Service Manual

Removal of Louver

1. Loosen the bottom two (2) screws and remove the two (2) M4 x L10 screws. Next move the
service panel for Communication Module upward and remove it from the condenser side panel.
2. Using a flashlight to locate the connectors, disconnect
CN1 and CN2 connectors from the control board.
3. Remove the five (5) M6 x L12 screws as shown from the condenser side panel.
Screw (5)
M6 x L12
Condenser Side Panel
Loosen Screw (2)
Control Panel
30
Screw (2)
M4 x L10
CN1
CN2