Authentication Settings- Remote Radius - D-Link NUCLIAS CONNECT DIS-3650AP User Manual

Table of Contents

Web User Interface

After selecting Remote RADIUS as the Authentication Type, we can configure the Remote RADIUS authentication that will be applied to each

wireless client in this network.

Session

Enter the session timeout value here. This value can

timeout(1-1440) :

be from 1 to 1440 minutes. By default, this value is 60

minutes.

Band :

Select 2.4GHz or 5GHz.

SSID Index :

Select the SSID for this Authentication.

Authentication Type :

Select the captive portal encryption type here. Options

to choose from are Web Redirection, Username/

Password, Passcode, Remote RADIUS, LDAP and POP3.

In this section we'll discuss the Remote RADIUS option.

Web Redirection State :

Default is Disable or select Enable to enable the

website redirection feature.

URL Path :

Select whether to use either HTTP or HTTPS here. After

selecting either http:// or https://, enter the URL of the

website that will be used in the space provided.

IPIF Status :

Select to Enable or Disable the Captive Portal with its

IP interface feature here.

VLAN Group :

Enter the VLAN Group ID here

Get IP From :

Static IP (Manual) is chosen here. Choose this option if

you do not have a DHCP server in your network, or if

you wish to assign a static IP address to the DIS-3650AP.

When Dynamic IP (DHCP) is selected, the other fields

here will be grayed out. Please allow about 2 minutes

for the DHCP client to be functional once this selection

is made.

Authentication Settings- Remote RADIUS

Table of Contents