IEI Technology AFL4-W10-EHL User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Touch Panel
  5. AFL4-W10-EHL
  6. User manual

IEI Technology AFL4-W10-EHL User Manual

Panel pc equips intel celeron j6412 on-board processor, 8gb lpddr4x on-board, ieee 802.11 a/b/g/n/ax, bluetooth v5.2, one m.2 2242 m key slot, one m.2 2242 m key slot
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
To learn more about EMAC's products and services and how they can help your project
http://ftp.emacinc.com/Tech_Info/About_EMAC_Products_and_Services.pdf
Authorized Distributor, Integrator, and Value-Added Reseller
Manual downloaded from
ftp.emacinc.com
For purchase information please contact
info@emacinc.com
For technical support please submit a ticket at
www.emacinc.com/support

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AFL4-W10-EHL and is the answer not in the manual?

Questions and answers

Related Manuals for IEI Technology AFL4-W10-EHL

Summary of Contents for IEI Technology AFL4-W10-EHL

  • Page 1 To learn more about EMAC’s products and services and how they can help your project http://ftp.emacinc.com/Tech_Info/About_EMAC_Products_and_Services.pdf Authorized Distributor, Integrator, and Value-Added Reseller Manual downloaded from ftp.emacinc.com For purchase information please contact info@emacinc.com For technical support please submit a ticket at www.emacinc.com/support...
  • Page 2 AFL4-W10/W12/12/W13-EHL Panel PC MODEL: MODEL: AFL4-W10/W12/12/W13-EHL AFL4-W10/W12/12/W13-EHL equips Panel PC Intel® Celeron® J6412 on-board processor, 8GB LPDDR4X on-board, IEEE 802.11 a/b/g/n/ax, Bluetooth V5.2, one M.2 2242 M key Slot, one M.2 2242 M key Slot User Manual User Manual Page 1 Rev.
  • Page 3 AFL4-W10/W12/12/W13-EHL Panel PC Revision Date Version Changes May 29, 2023 1.00 Initial release Page 2...
  • Page 4 AFL4-W10/W12/12/W13-EHL Panel PC Safety Instructions Warning! Read the user manual before connecting the system to the power source. Vorsicht! Bitte lesen Sie die Bedienungsanleitung, bevor Sie das System an eine Stromquelle anschließen. Attention! Avant de brancher le système à la source d'alimentation, consultez le mode d'emploi.
  • Page 5 AFL4-W10/W12/12/W13-EHL Panel PC Warning! Use only the adapter and power cord approved for this system. Use of another type of adapter may risk fire or explosion. Please refer to the user manual for the power adapter specifications. Vorsicht! Nur zugelassene Netzteile und Netzkabel dürfen verwendet werden. Die Benutzung von anderen Netzteilen kann einen Brand oder eine Explosion zur Folge haben.
  • Page 6 AFL4-W10/W12/12/W13-EHL Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 7 AFL4-W10/W12/12/W13-EHL Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product. NOTE These messages inform the reader of essential but non-critical information.

  • Page 8: Table Of Contents

    PECIFICATIONS 1.7.1 WLAN/Bluetooth Frequency Range and Power ..........21 1.8 D ......................22 IMENSIONS 1.8.1 AFL4-W10-EHL Dimensions ................22 1.8.2 AFL4-W12-EHL Dimensions ................23 1.8.3 AFL4-12-EHL Dimensions ................24 1.8.4 AFL4-W13-EHL Dimensions ................25 2 UNPACKING ....................... 26 2.1 U ......................
  • Page 9 AFL4-W10/W12/12/W13-EHL Panel PC 3.8.1 Wall Mounting ....................36 3.8.2 Arm Mounting ....................39 3.8.3 Stand Mounting ....................41 3.8.4 V-Stand Mounting .................... 41 3.9 P ..................43 OWERING ON THE YSTEM 3.10 R ....................44 ESET THE YSTEM 3.11 S ..................
  • Page 10 AFL4-W10/W12/12/W13-EHL Panel PC 5.5 S ......................... 96 ECURITY 5.6 B ........................98 5.6.1 Boot Configuration ..................98 5.6.2 Boot Option Priorities ..................99 5.7 S & E ......................100 6 CONNECTORS ......................102 6.1 P ..............103 ERIPHERAL NTERFACE ONNECTORS 6.2 I ..............
  • Page 11 AFL4-W10/W12/12/W13-EHL Panel PC 6.4.2 USB 2.0 Connectors (USB2_CON1/2/3) ............115 6.4.3 USB 3.2 Gen 2 Connectors (USB3_CON12) ..........115 6.4.4 Power Button (PWR_SW1) ................116 6.4.5 DC Jack ......................116 Page 10...
  • Page 12 Figure 1-4: Front Bottom Panel ....................18 Figure 1-5: Left Bottom Panel .....................18 Figure 1-6: Right Bottom Panel ....................19 Figure 1-7: AFL4-W10-EHL Dimensions (mm) ................22 Figure 1-8: AFL4-W12-EHL Dimensions (mm) ................23 Figure 1-9: AFL4-12-EHL Dimensions (mm) ................24 Figure 1-10: AFL4-W13-EHL Dimensions (mm) .................25 Figure 3-1: Back Cover Retention Screws .................33...
  • Page 13 AFL4-W10/W12/12/W13-EHL Panel PC Figure 4-3: Removing the WLAN Module ...................50 Figure 5-1: BIOS Starting Menu ....................53 Figure 5-1: Main Board Layout Diagram (Front Side) .............103 Figure 5-2: Main Board Layout Diagram (Solder Side) ............103 Page 12...
  • Page 14 AFL4-W10/W12/12/W13-EHL Panel PC List of Tables Table 1-1: Model Variation ......................16 Table 1-2: System Specifications ....................21 Table 1-3: WLAN/Bluetooth Frequency Range and Power............21 Table 2-1: Packing List .........................28 Table 2-2: Optional Items ......................29 Table 5-1: BIOS Navigation Keys ....................54 Table 5-2: BIOS On-screen Navigation Keys ................55 Table 5-1: Peripheral Interface Connectors ................104 Table 5-2: Touch Panel Connector (TOUCH_USB1) Pinouts ..........104 Table 5-3: Flash SPI ROM Connector (JBIOS1) Pinouts............105...
  • Page 15 AFL4-W10/W12/12/W13-EHL Panel PC Table 5-25: External Serial Port Connector (COM1/2/3/4) Pinouts ........114 Table 5-26: LAN Connector (J_LAN1/2) Pinouts ..............114 Table 5-27: HDMI1 Connector (HDMI1) Pinouts ...............115 Table 5-28: USB 2.0 Connectors (USB2_CON1/2/3) Pinouts ..........115 Table 5-29: USB 3.2 Gen 2 Connectors (USB3_CON12) Pinouts ...........115 Table 5-30: Power Button (PWR_SW1) Pinouts ..............116 Table 5-31: DC Jack Connector ....................116 Page 14...

  • Page 16: Introduction

    AFL4-W10/W12/12/W13-EHL Panel PC Chapter Introduction Page 15...

  • Page 17: Overview

    Two serial ports and two external USB 3.2 Gen 2 ports ensure simplified connectivity to a variety of external peripheral devices. 1.2 Model Variations The model number and model variation are listed below. Model Size Resolution AFL4-W10-EHL-J1/8G-R10 10.1” 1280 x 800 AFL4-W12-EHL-J1/8G-R10 12.1” (16:10) 1280 x 800 AFL4-12-EHL-J1/8G-R10 12.1”...

  • Page 18: Features

    AFL4-W10/W12/12/W13-EHL Panel PC 1.3 Features The AFL4-W10/W12/12/W13-EHL features are listed below: ▪ Intel® Celeron® Processor J6412 ▪ Preinstalled with 8GB on-board dual-channel LPDDR4x RAM ▪ Anti-glare and anti-UV touchscreen ▪ FHD touch display with optical bonding ▪ IP 64 compliant front panel ▪...

  • Page 19: Bottom Panel

    AFL4-W10/W12/12/W13-EHL Panel PC Figure 1-3: Rear View 1.6 Bottom Panel The bottom panel of the AFL4-W10/W12/12/W13-EHL has the following connectors and switches. Figure 1-4: Front Bottom Panel Figure 1-5: Left Bottom Panel Page 18...

  • Page 20: System Specifications

    BIOS menu first and choose which operating system will be installed. Otherwise the USB 3.2 Gen 2 ports cannot be used for OS installation. 1.7 System Specifications The technical specifications for the AFL4-W10/W12/12/W13-EHL systems are listed in Table 1-2. Specification AFL4-W10-EHL AFL4-W12-EHL AFL4-12-EHL AFL4-W13-EHL LCD Size 10.1" (16:10) 12.1"...
  • Page 21 AFL4-W10/W12/12/W13-EHL Panel PC Touch Controller EETI EXC 81 Series CPU (SoC) Intel® Celeron® Processor J6412 1.5M Cache, up to 2.60 GHz / TDP 10W 8GB on-board dual-channel LPDDR4x RAM Ethernet LAN1: Intel ® I225V 2.5GbE controller LAN2: Intel ® I225V 2.5GbE controller 1 x M.2 M key 2242 (PCIe Gen3 x1) Expansion 1 x M.2 M key 2242/2280 (PCIe Gen3 x1 + SATA)

  • Page 22: Wlan/Bluetooth Frequency Range And Power

    AFL4-W10/W12/12/W13-EHL Panel PC 2 x 2.5GbE LAN 2 x RS-232/422/485 by DB9 2 x RS-232 by DB9 3 x USB 2.0 2 x USB 3.2 Gen 2 I/O Ports and Switches 1 x HDMI output 1 x Power button 1 x AT/ATX switch 1 x Reset button 1 x 12V DC input jack Table 1-2: System Specifications...

  • Page 23: Dimensions

    AFL4-W10/W12/12/W13-EHL Panel PC 1.8 Dimensions The AFL4-W10/W12/12/W13-EHL dimensions are shown below. 1.8.1 AFL4-W10-EHL Dimensions Figure 1-7: AFL4-W10-EHL Dimensions (mm) Page 22...

  • Page 24: Afl4-W12-Ehl Dimensions

    AFL4-W10/W12/12/W13-EHL Panel PC 1.8.2 AFL4-W12-EHL Dimensions Figure 1-8: AFL4-W12-EHL Dimensions (mm) Page 23...

  • Page 25: Afl4-12-Ehl Dimensions

    AFL4-W10/W12/12/W13-EHL Panel PC 1.8.3 AFL4-12-EHL Dimensions Figure 1-9: AFL4-12-EHL Dimensions (mm) Page 24...

  • Page 26: Afl4-W13-Ehl Dimensions

    AFL4-W10/W12/12/W13-EHL Panel PC 1.8.4 AFL4-W13-EHL Dimensions Figure 1-10: AFL4-W13-EHL Dimensions (mm) Page 25...

  • Page 27: Unpacking

    AFL4-W10/W12/12/W13-EHL Panel PC Chapter Unpacking Page 26...

  • Page 28: Unpacking

    AFL4-W10/W12/12/W13-EHL Panel PC 2.1 Unpacking To unpack the panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the panel PC has been properly installed.

  • Page 29: Packing List

    AFL4-W10/W12/12/W13-EHL Panel PC 2.2 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the AFL4-W10/W12/12/W13-EHL was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com.

  • Page 30: Optional Items

    AFL4-W10/W12/12/W13-EHL Panel PC 2.3 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image VESA 75/100 wall mount kit (P/N: AFLWK-19B) (P/N: ARM-11-RS) Stand for VESA 75/100 (P/N: STAND-C12-R10) LCD monitor stand with adjustable hinge (P/N: VSTAND-A10-R11) Table 2-2: Optional Items If any of these items are missing or damaged, contact the distributor or sales...

  • Page 31: Installation

    AFL4-W10/W12/12/W13-EHL Panel PC Chapter Installation Page 30...

  • Page 32: Anti-Static Precautions

    AFL4-W10/W12/12/W13-EHL Panel PC 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the AFL4-W10/W12/12/W13-EHL may result in permanent damage to the AFL4-W10/W12/12/W13-EHL and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL4-W10/W12/12/W13-EHL.

  • Page 33: Installation And Configuration Steps

    AFL4-W10/W12/12/W13-EHL Panel PC ▪ Anti-static Discharge: If a user opens the rear panel of the panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear an anti-static wristband. 3.3 Installation and Configuration Steps The following installation steps must be followed.

  • Page 34: Module Installation

    AFL4-W10/W12/12/W13-EHL Panel PC Figure 3-1: Back Cover Retention Screws Step 2: Slide the back cover toward the I/O panel until it is disengaged from the locking mechanism. Then, lift the back cover off the chassis. See Figure 3-2. Figure 3-2: Remove the Back Cover 3.5 M.2 Module Installation To install a M.2 module into the AFL4-W10/W12/12/W13-EHL, please follow the steps below:...

  • Page 35: Clear Cmos

    AFL4-W10/W12/12/W13-EHL Panel PC Figure 3-3: M.2 Module Slot Location Step 3: Line up the notch on the M.2 module with the notch on the connector. Slide the M.2 module into the socket at an angle of about 20º. Step 4: Secure the M.2 module with the retention screw.

  • Page 36: At/Atx Mode Selection

    AFL4-W10/W12/12/W13-EHL Panel PC If the AFL4-W10/W12/12/W13-EHL fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information. To do this, push the clear CMOS button for three seconds, then restart the system. The clear CMOS button location is shown in Figure 3-5.

  • Page 37: Atx Power Mode

    AFL4-W10/W12/12/W13-EHL Panel PC ▪ Self-service kiosk ▪ Plant environment monitoring system ▪ Factory automation platform ▪ Manufacturing shop flow 3.7.2 ATX Power Mode With the ATX mode selected, the AFL4-W10/W12/12/W13-EHL panel PC goes in a standby mode when it is turned off. The panel PC can be easily turned on via network or a power switch in standby mode.

  • Page 38: Figure 3-7: Wall-Mounting Bracket

    AFL4-W10/W12/12/W13-EHL Panel PC Step 4: Align the wall-mounting bracket screw holes with the pilot holes. Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into the four pilot holes and tightening them (Figure 3-7). Figure 3-7: Wall-mounting Bracket Step 6: Insert the four monitor mounting screws provided in the wall mount kit into the four screw holes on the real panel of the panel PC and tighten until the screw...

  • Page 39: Figure 3-8: Chassis Support Screws

    AFL4-W10/W12/12/W13-EHL Panel PC Step 7: Align the mounting screws on the monitor rear panel with the mounting holes on the bracket. Step 8: Carefully insert the screws through the holes and gently pull the monitor downwards until the monitor rests securely in the slotted holes (Figure 3-8). Ensure that all four of the mounting screws fit snugly into their respective slotted holes.

  • Page 40: Arm Mounting

    AFL4-W10/W12/12/W13-EHL Panel PC Figure 3-9: Secure the Panel PC 3.8.2 Arm Mounting The AFL4-W10/W12/12/W13-EHL is VESA (Video Electronics Standards Association) compliant and can be mounted on an arm with a 75/100 mm interface pad. To mount the AFL4-W10/W12/12/W13-EHL on an arm, please follow the steps below. Step 1: The arm is a separately purchased item.

  • Page 41: Figure 3-10: Arm Mounting Retention Screw Holes

    AFL4-W10/W12/12/W13-EHL Panel PC Step 3: Align the retention screw holes on the mounting arm interface with those in the panel PC (Figure 3-10). Figure 3-10: Arm Mounting Retention Screw Holes Step 4: Secure the AFL4-W10/W12/12/W13-EHL to the interface pad by inserting four retention screws through the mounting arm interface pad and into the AFL4-W10/W12/12/W13-EHL.

  • Page 42: Stand Mounting

    AFL4-W10/W12/12/W13-EHL Panel PC 3.8.3 Stand Mounting To mount the AFL4-W10/W12/12/W13-EHL using the stand mounting kit, please follow the steps below. Step 1: Locate the screw holes on the rear of the AFL4-W10/W12/12/W13-EHL. This is where the bracket will be attached. Step 2: Align the bracket with the screw holes.

  • Page 43: Figure 3-13: Drill Pilot Holes For V-Stand

    AFL4-W10/W12/12/W13-EHL Panel PC Figure 3-13: Drill Pilot Holes for V-Stand Step 2: Align the screw holes on the V-Stand with the VESA mount screw holes on the system rear panel. Step 3: Insert the four VESA mount screws into the four screw holes on the system rear panel.

  • Page 44: Powering On The System

    AFL4-W10/W12/12/W13-EHL Panel PC Step 6: Adjust the V-Stand to have a best viewing angle to operate the system. Figure 3-15: Secure V-Stand to Mounting Area 3.9 Powering on the System WARNING: To reduce potential safety issues, only the power adapter provided with the product, a replacement power adapter provided by IEI, or a power adapter purchased as an accessory from IEI should be used with the product.

  • Page 45: Reset The System

    AFL4-W10/W12/12/W13-EHL Panel PC Figure 3-16: Power Button 3.10 Reset the System The reset button enables user to reboot the system when the system is turned on. The reset button location is shown in Figure 3-17. Press the reset button to reboot the system. Figure 3-17: Reset Button Location 3.11 Software Installation All the drivers for the AFL4-W10/W12/12/W13-EHL are available on IEI Resource...

  • Page 46: Driver Download

    AFL4-W10/W12/12/W13-EHL Panel PC Figure 3-18: IEI Resource Download Center 3.11.1 Driver Download To download drivers from IEI Resource Download Center, follow the steps below. Step 1: Go to https://download.ieiworld.com. Type AFL4-W10/W12/12/W13-EHL and press Enter. Step 2: All product-related software, utilities, and documentation will be listed. You can choose Driver to filter the result.

  • Page 47: Adjust Brightlight

    3.11.2 Adjust Brightlight Among the AFL4 series products, AFL4-W10-EHL, AFL4-W12-EHL and AFL4-12-EHL can use the "Adjust Brightlight" software to adjust the brightness. Users can download the software from the IEI official website or contact IEI sales to obtain the software. After the...

  • Page 48: System Maintenance

    AFL4-W10/W12/12/W13-EHL Panel PC Chapter System Maintenance Page 47...

  • Page 49: System Maintenance Introduction

    AFL4-W10/W12/12/W13-EHL Panel PC 4.1 System Maintenance Introduction If the components of the AFL4-W10/W12/12/W13-EHL fail they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. Back cover removal instructions for the AFL4-W10/W12/12/W13-EHL are described below. 4.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the...

  • Page 50: Turn Off The Power

    AFL4-W10/W12/12/W13-EHL Panel PC 4.3 Turn off the Power WARNING: Failing to turn off the system before opening it can cause permanent damage to the system and serious or fatal injury to the user. Before any maintenance procedures are carried out on the system, make sure the system is turned off.

  • Page 51: Figure 4-2: Releasing The Wlan Module

    AFL4-W10/W12/12/W13-EHL Panel PC Step 5: Disconnect the antenna cables on the WLAN module and remove the retention screw to release the WLAN card (Figure 4-2). Figure 4-2: Releasing the WLAN Module Step 6: Grasp the WLAN module by the edges and carefully pull it out of the socket (Figure 4-3).

  • Page 52: Reinstalling The Cover

    AFL4-W10/W12/12/W13-EHL Panel PC Step 8: Push the WLAN module down and secure it with the previously removed retention screw. Step 9: Connect the antenna cables. Step 10: Replace the back cover and secure it using the previously removed retention screws. 4.5 Reinstalling the Cover WARNING: Failing to reinstall the cover may result in permanent damage to the...

  • Page 53: Bios

    AFL4-W10/W12/12/W13-EHL Panel PC Chapter BIOS Page 52...

  • Page 54: Introduction

    AFL4-W10/W12/12/W13-EHL Panel PC 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.

  • Page 55: Using Setup

    AFL4-W10/W12/12/W13-EHL Panel PC 5.1.2 Using Setup The BIOS Setup menu can be navigated by using a keyboard or a touchscreen. 5.1.2.1 Keyboard Navigation For keyboard navigation, use the navigation keys shown in Table 5-1. Function Up arrow Move to previous item Down arrow Move to next item Left arrow...

  • Page 56: Table 5-2: Bios On-Screen Navigation Keys

    AFL4-W10/W12/12/W13-EHL Panel PC 5.1.2.2 Touch Navigation For touchscreen navigation, use the on-screen navigation keys shown below. On-screen Button Function Previous Values Load the last value you set. Optimized Defaults Load the factory default values in order to achieve the best performance. Back Return to the previous menu.

  • Page 57: Getting Help

    AFL4-W10/W12/12/W13-EHL Panel PC 5.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears. To exit the Help Window, press the key. 5.1.4 Unable to Reboot after Configuration Changes If the computer cannot boot after changes to the system configuration is made, CMOS defaults.

  • Page 58: Main

    AFL4-W10/W12/12/W13-EHL Panel PC 5.2 Main The Main BIOS menu appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS Menu 1: Main (1/3) Page 57...
  • Page 59 AFL4-W10/W12/12/W13-EHL Panel PC BIOS Menu 2: Main (2/3) BIOS Menu 3: Main (3/3) Page 58...
  • Page 60 AFL4-W10/W12/12/W13-EHL Panel PC ➔ BIOS Information The BIOS Information lists a brief summary of the BIOS. The fields in BIOS Information cannot be changed. The items shown in the system overview include: ▪ BIOS Vendor: Installed BIOS vendor ▪ Core Version: Current BIOS version ▪...
  • Page 61 AFL4-W10/W12/12/W13-EHL Panel PC ▪ ME Firmware SKU: Displays the ME Firmware SKU ▪ System Date [xx/xx/xx]: Use the System Date option to set the system date. Manually enter the day, month and year. ▪ System Time [xx:xx:xx]: Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.

  • Page 62: Advanced

    AFL4-W10/W12/12/W13-EHL Panel PC 5.3 Advanced Use the Advanced menu to configure the CPU and peripheral devices through the following sub-menus: WARNING! Setting the wrong values in the sections below may cause the system to malfunction. Make sure that the settings made are compatible with the hardware.

  • Page 63: Cpu Configuration

    AFL4-W10/W12/12/W13-EHL Panel PC 5.3.1 CPU Configuration Use the CPU Configuration menu to view detailed CPU specifications or enable the Intel Virtualization Technology. BIOS Menu 5: CPU Configuration (1/3) Page 62...
  • Page 64 AFL4-W10/W12/12/W13-EHL Panel PC BIOS Menu 5: CPU Configuration (2/3) BIOS Menu 6: CPU Configuration (3/3) ➔ Intel (VMX) Virtualization Technology [Enabled] Use the Intel (VMX) Virtualization Technology option to enable or disable virtualization on the system. When combined with third party software, Intel® Virtualization technology allows several OSs to run on the same system at the same time.
  • Page 65 AFL4-W10/W12/12/W13-EHL Panel PC ➔ Enable three cores in the processor package. ➔ EIST [Enable] Use the EIST option to enable more than two frequency ranges to be supported. ➔ Disabled Disables more than two frequency ranges ➔ Enabled Enables more than two frequency ranges EFAULT ➔...
  • Page 66 AFL4-W10/W12/12/W13-EHL Panel PC ➔ Power Limit 2 Use the Power Limit 2 to set Power Limit in Milli Watts. BIOS will round to the nearest 1/8W when programming. If the value is 0, BIOS will program this value as 1.25*TDP. For 12.50W, enter 12500.

  • Page 67: Trusted Computing

    AFL4-W10/W12/12/W13-EHL Panel PC 5.3.2 Trusted Computing Use the Trusted Computing menu (BIOS Menu 7) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). BIOS Menu 7: PCH-FW Configuration ➔ TPM Support [Enable] Use the TPM Support option to enable or disable BIOS support for security device. ➔...

  • Page 68: F81966 Super Io Configuration

    AFL4-W10/W12/12/W13-EHL Panel PC ➔ None TPM information is previous.S EFAULT ➔ TPM Clear TPM information is cleared 5.3.3 F81966 Super IO Configuration Use the F81966 Super IO Configuration menu (BIOS Menu 8) to set or change the configurations for serial ports. BIOS Menu 8: F81966 Super IO Configuration Page 67...
  • Page 69 AFL4-W10/W12/12/W13-EHL Panel PC 5.3.3.1 Serial Port 1 Configuration Use the Serial Port 1 Configuration menu (BIOS Menu 9) to configure the serial port. BIOS Menu 9: Serial Port 1 Configuration Menu ➔ Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. ➔...
  • Page 70 AFL4-W10/W12/12/W13-EHL Panel PC ➔ IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=4 address is IRQ4 ➔ Device Mode [RS232] Use the Device Mode option to change the serial port mode. ➔ RS232 The serial port mode is RS-232 EFAULT RS422 with Register The serial port mode is RS-422...
  • Page 71 AFL4-W10/W12/12/W13-EHL Panel PC 5.3.3.2 Serial Port 2 Configuration Use the Serial Port 2 Configuration menu (BIOS Menu 10) to configure the serial port. BIOS Menu 10: Serial Port 2 Configuration Menu ➔ Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. ➔...
  • Page 72 AFL4-W10/W12/12/W13-EHL Panel PC ➔ IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3 address is IRQ3 ➔ Device Mode [RS232] Use the Device Mode option to change the serial port mode. ➔ RS232 The serial port mode is RS-232 EFAULT RS422 with Register The serial port mode is RS-422...
  • Page 73 AFL4-W10/W12/12/W13-EHL Panel PC 5.3.3.3 Serial Port 3 Configuration Use the Serial Port 3 Configuration menu (BIOS Menu 11) to configure the serial port. BIOS Menu 11: Serial Port 3 Configuration Menu ➔ Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. ➔...
  • Page 74 AFL4-W10/W12/12/W13-EHL Panel PC ➔ IO=2E0h; Serial Port I/O port address is 2E0h and the interrupt IRQ=10 address is IRQ10 5.3.3.4 Serial Port 4 Configuration Use the Serial Port 4 Configuration menu (BIOS Menu 12) to configure the serial port. BIOS Menu 12: Serial Port 4 Configuration Menu ➔...

  • Page 75: Ec Kb9068 H/W Monitor

    AFL4-W10/W12/12/W13-EHL Panel PC ➔ Device Settings The Device Settings option shows the serial port IO port address and interrupt address. ➔ IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=10 address is IRQ10 5.3.4 EC KB9068 H/W Monitor The EC KB9068 H/W Monitor menu (BIOS Menu 13) contains the smart fan mode configuration submenu and shows the state of H/W real-time operating temperature, fan speeds and system voltages.
  • Page 76 AFL4-W10/W12/12/W13-EHL Panel PC ➔ PC Health Status The following system parameters and values are shown. The system parameters that are monitored are: ▪ System Temperatures: CPU Temperature System Temperature1 ▪ Fan Speeds: CPU_Fan1 Speed SYS_Fan1 Speed ▪ Voltages: CPU_CORE1 +12V +5VSB +3.3VSB +VCCIN_AUX_CPU...
  • Page 77 AFL4-W10/W12/12/W13-EHL Panel PC 5.3.4.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu (BIOS Menu 14) to configure the CPU/system fan start/off temperature and control mode. BIOS Menu 14: Smart Fan Mode Configuration ➔ CPU_FAN1 Smart Fan Control [Auto Mode] Use the CPU_FAN1 Smart Fan Control option to configure the CPU Smart Fan.
  • Page 78 AFL4-W10/W12/12/W13-EHL Panel PC ➔ CPU_FAN1 Start Temperature If the CPU temperature is between fan off and fan start, the fan speed change to fan start PWM. To set a value, Use the + or – key to change the value or enter a decimal number between 1 and 100.

  • Page 79: Serial Port Console Redirection

    AFL4-W10/W12/12/W13-EHL Panel PC ➔ SYS_FAN1 Start PWM Use the SYS_Fan1 Start PWM option to set the PWM start value. Use the + or – key to change the value or enter a decimal number between 1 and 100. 5.3.5 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 15) allows the console redirection options to be configured.
  • Page 80 AFL4-W10/W12/12/W13-EHL Panel PC BIOS Menu 16: Serial Port Console Redirection (2/2) ➔ Console Redirection [Disabled] Use Console Redirection option to enable or disable the console redirection function. ➔ Disabled Disabled the console redirection function EFAULT ➔ Enabled Enabled the console redirection function The Console Redirection Settings submenu will be available when the Console Redirection option is enabled.
  • Page 81 AFL4-W10/W12/12/W13-EHL Panel PC BIOS Menu 17: COM Console Redirection Settings ➔ Terminal Type [ANSI] Use the Terminal Type option to specify the remote terminal type. ➔ VT100 The target terminal type is VT100 ➔ VT100+ The target terminal type is VT100+ ➔...
  • Page 82 AFL4-W10/W12/12/W13-EHL Panel PC ➔ 9600 Sets the serial port transmission speed at 9600. ➔ 19200 Sets the serial port transmission speed at 19200. ➔ 38400 Sets the serial port transmission speed at 38400. ➔ 57600 Sets the serial port transmission speed at 57600. ➔...

  • Page 83: Nvme Configuration

    AFL4-W10/W12/12/W13-EHL Panel PC ➔ Sets the number of stop bits at 2. 5.3.6 NVMe Configuration Use the NVMe Configuration (BIOS Menu 18) menu to display the NVMe controller and device information. BIOS Menu 18: NVMe Configuration Page 82...

  • Page 84: Chipset

    AFL4-W10/W12/12/W13-EHL Panel PC 5.4 Chipset Use the Chipset menu (BIOS Menu 19) to access the PCH IO and System Agent (SA) configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. BIOS Menu 19: Chipset Page 83...

  • Page 85: System Agent (Sa) Configuration

    AFL4-W10/W12/12/W13-EHL Panel PC 5.4.1 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu (BIOS Menu 20) to configure the System Agent (SA) parameters. BIOS Menu 20: System Agent (SA) Configuration ➔ VT-d [Enabled] Use the VT-d option to enable or disable the VT-d capability. ➔...
  • Page 86 AFL4-W10/W12/12/W13-EHL Panel PC 5.4.1.1 Memory Configuration Use the Memory Configuration submenu (BIOS Menu 21) to view memory information. BIOS Menu 21: Memory Configuration 5.4.1.2 Graphics Configuration Use the Graphics Configuration (BIOS Menu 22) menu to configure the video device connected to the system. Page 85...
  • Page 87 AFL4-W10/W12/12/W13-EHL Panel PC BIOS Menu 22: Graphics Configuration ➔ Primary Display [Auto] Use the Primary Display option to select the primary graphics controller the system uses. The following options are available: ▪ Auto Default ▪ IGFX ▪ ▪ ▪ ➔ Internal Graphics [Enabled] Use the Internal Graphics option to configure whether to keep IGFX enabled.
  • Page 88 AFL4-W10/W12/12/W13-EHL Panel PC Graphics option should be set to Enabled and the above Primary Display option should be set to IGFX. ➔ Auto Auto mode ➔ Disabled Disables IGFX. ➔ Enabled Default Enables IGFX. ➔ DVMT Pre-Allocated [160M] Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots.
  • Page 89 AFL4-W10/W12/12/W13-EHL Panel PC ➔ LCD Control BIOS Menu 23: LCD Control ➔ On board LVDS [Enabled] Use the On board LVDS option to select LVDS Enabled or Disabled. ➔ Enabled Enabled on board LVDS. EFAULT ➔ Disabled Disabled on board LVDS. ➔...

  • Page 90: Pch-Io Configuration

    AFL4-W10/W12/12/W13-EHL Panel PC 5.4.2 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 24) to configure the PCH parameters. BIOS Menu 24: PCH-IO Configuration ➔ Auto Power Button Function [Disabled (AT)] Use the Auto Power Button Function BIOS option to show the power mode state. Use the J_ATX_AT1 to switch the AT/ATX power mode.
  • Page 91 AFL4-W10/W12/12/W13-EHL Panel PC ➔ Power Saving Function (EUP) [Disabled] Use the Power Saving Function (EUP) BIOS option to enable or disable the power saving function. ➔ Disabled Power saving function is disabled. EFAULT ➔ Enabled Power saving function is enabled. It will reduce power consumption when the system is off.
  • Page 92 AFL4-W10/W12/12/W13-EHL Panel PC 5.4.2.1 PCI Express Configuration Use the PCI Express Configuration submenu (BIOS Menu 25) to configure the PCI Express slots. BIOS Menu 25: PCI Express Configuration Page 91...
  • Page 93 AFL4-W10/W12/12/W13-EHL Panel PC 5.4.2.1.1 PCIe Root Port Setting Use the M.2 Slot (M2_M1), PCIE7 Slot (x1), PCIE6 Slot (x4), PCIE1 Slot (x4) submenu (BIOS Menu 26) to configure the PCIe Root Port Setting. BIOS Menu 26: PCIe Slot Configuration Submenu PCIe Speed [Auto] ➔...
  • Page 94 AFL4-W10/W12/12/W13-EHL Panel PC ➔ Detect Non-Compliance Device [Disabled] Use the Detect Non-Compliance Device option to configure whether to detect if a non-compliance PCI Express device is connected to the PCI Express port. ➔ Disabled Do not detect if a non-compliance PCI Express EFAULT device is connected to the PCI Express port.
  • Page 95 AFL4-W10/W12/12/W13-EHL Panel PC 5.4.2.2 SATA Configuration Use the SATA Configuration menu (BIOS Menu 27) to change and/or set the configuration of the SATA devices installed in the system. BIOS Menu 27: SATA Configuration SATA Mode Selection [AHCI] ➔ Use the SATA Mode Selection option to determine how the SATA devices operate. ➔...
  • Page 96 AFL4-W10/W12/12/W13-EHL Panel PC Use the Hot Plug option to designate the correspondent port as hot-pluggable. ➔ Disabled EFAULT Disables the hot-pluggable function of the SATA port. ➔ Enabled Designates the SATA port as hot-pluggable. 5.4.2.3 HD Audio Configuration Use the HD Audio Configuration menu (BIOS Menu 28) to configure the PCH Azalia settings.

  • Page 97: Security

    AFL4-W10/W12/12/W13-EHL Panel PC ➔ Disabled The onboard High Definition Audio controller is disabled. ➔ Enabled The onboard High Definition Audio controller is enabled. EFAULT 5.5 Security Use the Security menu (BIOS Menu 30) to set system and user passwords. BIOS Menu 29: Security (1/2) Page 96...
  • Page 98 AFL4-W10/W12/12/W13-EHL Panel PC BIOS Menu 30: Security (2/2) ➔ Administrator Password Use the Administrator Password to set or change an administrator password. ➔ User Password Use the User Password to set or change a user password. Page 97...

  • Page 99: Boot

    AFL4-W10/W12/12/W13-EHL Panel PC 5.6 Boot Use the Boot menu (BIOS Menu 31) to configure system boot options. BIOS Menu 31: Boot 5.6.1 Boot Configuration Quiet Boot [Enabled] ➔ Use the Quiet Boot BIOS option to select the screen display when the system boots. ➔...

  • Page 100: Boot Option Priorities

    AFL4-W10/W12/12/W13-EHL Panel PC ➔ Launch PXE OpROM [Disabled] Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices. ➔ Disabled Ignore all PXE Option ROMs EFAULT ➔ Enabled Load PXE Option ROMs. 5.6.2 Boot Option Priorities Use the Boot Option # N to choose the system boots from the peripherals you selected.

  • Page 101: Save & Exit

    AFL4-W10/W12/12/W13-EHL Panel PC 5.7 Save & Exit Use the Save & Exit menu (BIOS Menu 32) to load default BIOS values, optimal failsafe values and to save configuration changes. BIOS Menu 32: Save & Exit ➔ Save Changes and Reset Use the Save Changes and Reset option to save the changes made to the BIOS options and reset the system.
  • Page 102 AFL4-W10/W12/12/W13-EHL Panel PC ➔ Restore Defaults Use the Restore Defaults option to load the optimal default values for each of the parameters on the Setup menus. F3 key can be used for this operation. ➔ Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. ➔...

  • Page 103: Connectors

    AFL4-W10/W12/12/W13-EHL Panel PC Chapter Connectors Page 102...

  • Page 104: Peripheral Interface Connectors

    AFL4-W10/W12/12/W13-EHL Panel PC 6.1 Peripheral Interface Connectors The AFL4-W10/W12/12/W13-EHL panel PC motherboard comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in Figure 6-1 and Figure 6-2. The connector pinouts for these connectors are listed in the following sections.

  • Page 105: Internal Peripheral Connectors

    AFL4-W10/W12/12/W13-EHL Panel PC 6.2 Internal Peripheral Connectors Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. The table below shows a list of the peripheral interface connectors on the AFL4-W10/W12/12/W13-EHL motherboard. Pinouts of these connectors can be found in the following sections.

  • Page 106: Flash Spi Rom Connector (Jbios1)

    AFL4-W10/W12/12/W13-EHL Panel PC 6.2.2 Flash SPI ROM Connector (JBIOS1) PIN NO. DESCRIPTION +3.3V SPI_CS# SPI_SO SPI_CLK SPI_SI Table 6-3: Flash SPI ROM Connector (JBIOS1) Pinouts 6.2.3 EC Debug Port Connector (EC_DEBUG1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION EDICLK EDICS EDIDI EDIDO Table 6-4: EC Debug Port Connector (EC_DEBUG1) Pinouts 6.2.4 Speaker Connector (SPK_L1)

  • Page 107: Digital Mic Connector (Dmic1)

    AFL4-W10/W12/12/W13-EHL Panel PC 6.2.6 Digital MIC Connector (DMIC1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION DMIC_CLK DMIC_DATA Table 6-7: Digital MIC Connector (DMIC1) Pinouts 6.2.7 I² C Connector (I2C1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION SMB_CLK_LIGHT SMB_DATA_LIGHT Table 6-8: I² C Connector (I2C1) Pinouts 6.2.8 SMBus Connector (SMB1) PIN NO.
  • Page 108 AFL4-W10/W12/12/W13-EHL Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION PETP0 PETN0 PERP0 PERN0 PCIE_CLK+ PCIE_CLK- PLT_RST CLKREQ0# Pull up PCIE_WAKE W_DIS I2C_DAT I2C_CLK +3.3V Page 107...

  • Page 109: M-Key Slot (M2_M1)

    AFL4-W10/W12/12/W13-EHL Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION +3.3V +3.3V Table 6-11: M.2 A-Key Slot (M2_AE1) Pinouts 6.2.11 M.2 M-Key Slot (M2_M1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION +3.3V +3.3V PERN3 PERP3 DAS/DSS# PETN3 +3.3V PETP3 +3.3V +3.3V PERN2 +3.3V PERP2 PETN2...

  • Page 110: M-Key Slot (M2_M2)

    AFL4-W10/W12/12/W13-EHL Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION CLKREQ PCIECLKN PEWAKE PCIECLKP PEDET +3.3V +3.3V +3.3V +3.3V Table 6-12: M.2 M-Key Slot (M2_M1) Pinouts 6.2.12 M.2 M-Key Slot (M2_M2) PIN NO. DESCRIPTION PIN NO. DESCRIPTION +3.3V +3.3V PERN3 PERP3 DAS/DSS# PETN3 +3.3V...

  • Page 111: Edp Connector (Edp1)

    AFL4-W10/W12/12/W13-EHL Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION PERP1 PETN1 PETP1 DEVSLP PERN0 PERP0 PETN0 PETP0 PERST# CLKREQ PCIECLKN PEWAKE PCIECLKP Table 6-13: M.2 M-Key Slot (M2_M2) Pinouts 6.2.13 eDP Connector (EDP1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION VCC_LCD (eDP_TX3-) (eDP_TX3+) (eDP_TX2-)

  • Page 112: Lvds Connector (Lcd1)

    AFL4-W10/W12/12/W13-EHL Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION (eDP_AUX-) BKLT_PWR BKLT_PWR VCC_LCD BKLT_PWR VCC_LCD BKLT_PWR VCC_LCD Table 6-14: eDP Connector (EDP1) Pinouts 6.2.14 LVDS Connector (LCD1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION A0P_L A0M_L A1P_L A1M_L A2P_L A2M_L CLK1P_L CLK1M_L A3P_L A3M_L...

  • Page 113: Cpu Fan Connector (Cpu_Fan1)

    AFL4-W10/W12/12/W13-EHL Panel PC GROUND BACKLIGHT ENABLE Table 6-16: LVDS Backlight Power (INV1) Pinouts 6.2.16 CPU Fan Connector (CPU_FAN1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION FANIO +12V PWM(+5V) Table 6-17: CPU Fan Connector (CPU_FAN1) Pinouts 6.3 Jumper less Setting Type Jumper LABEL PWM Power Selection 3-pin header...

  • Page 114: Backlight Vcc Selection (J_Bl_Vcc)

    AFL4-W10/W12/12/W13-EHL Panel PC 6.3.3 Backlight VCC Selection (J_BL_VCC) J_BL_VCC DESCRIPTION +3.3V(Default) Table 6-21: Backlight VCC Selection (J_BL_VCC) 6.3.4 LVDS Power Selection (J_VLVDS1) J_VLVDS1 DESCRIPTION +3.3V(Default) Table 6-22: LVDS Power Selection (J_VLVDS1) 6.3.5 Flash Descriptor Security Override J_FLASH1 DESCRIPTION 1-2(default)* Disabled-Default Short 2-3 Enabled Table 6-23: Flash Descriptor Security Override...

  • Page 115: Rs-232/422/485 Serial Ports (Com1/2/3/4)

    AFL4-W10/W12/12/W13-EHL Panel PC 6.4.1 RS-232/422/485 Serial Ports (COM1/2/3/4) PIN NO. DESCRIPTION DATA CARRIER DETECT (DCD) RECEIVE DATA (RXD) TRANSMIT DATA (TXD) DATA TERMINAL READY (DTR) GND (GND) DATA SET READY (DSR) REQUEST TO SEND (RTS1/2) CLEAR TO SEND (CTS1/2) RING INDICATOR (RI1/2) Table 6-25: External Serial Port Connector (COM1/2/3/4) Pinouts 6.4.2 RJ45 LAN Connector (J_LAN1/2) PIN NO.
  • Page 116 AFL4-W10/W12/12/W13-EHL Panel PC PIN NO. DESCRIPTION PIN NO. DESCRIPTION HDMI_GND HDMI_DATA0# HDMI_GND HDMI_CLK HDMI_GND HDMI_GND HDMI_CLK# HDMI_GND Table 6-27: HDMI1 Connector (HDMI1) Pinouts 6.4.2 USB 2.0 Connectors (USB2_CON1/2/3) PIN NO. DESCRIPTION USB_PN- USB_PP+ Table 6-28: USB 2.0 Connectors (USB2_CON1/2/3) Pinouts 6.4.3 USB 3.2 Gen 2 Connectors (USB3_CON12) PIN NO.
  • Page 117 AFL4-W10/W12/12/W13-EHL Panel PC 6.4.4 Power Button (PWR_SW1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Table 6-30: Power Button (PWR_SW1) Pinouts 6.4.5 DC Jack PIN NO. DESCRIPTION Table 6-31: DC Jack Connector Page 116...
  • Page 118 AFL4-W10/W12/12/W13-EHL Panel PC Appendix Regulatory Compliance Page 117...
  • Page 119 AFL4-W10/W12/12/W13-EHL Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive (2014/30/EU) ◼ Low-Voltage Directive (2014/35/EU) ◼ RoHS II Directive (2015/863/EU) ◼ If the user modifies and install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 120 AFL4-W10/W12/12/W13-EHL Panel PC Česky [Czech] IEI Integration Corp tímto prohlašuje, že tento zařízení je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 2014/53/EU. Dansk [Danish] IEI Integration Corp erklærer herved, at følgende udstyr overholder de væsentlige krav og øvrige relevante krav i direktiv 2014/53/EU.
  • Page 121 AFL4-W10/W12/12/W13-EHL Panel PC Malti [Maltese] IEI Integration Corp jiddikjara li dan prodott jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 2014/53/EU. Magyar [Hungarian] IEI Integration Corp nyilatkozom, hogy a berendezés megfelel a vonatkozó alapvetõ követelményeknek és az 2014/53/EU irányelv egyéb elõírásainak. Polski [Polish] IEI Integration Corp oświadcza, że wyrobu jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 2014/53/EU.
  • Page 122 Hazardous Substances (RoHS) that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. UKCA WARNING Hereby, IEI INTEGRATION CORP declares that the radio equipment type AFL4-W10-EHL 、 AFL4-W12-EHL、 AFL4-12-EHL、 AFL4-W13-EHL are in compliance with the Radio Equipment Regulations 2017(S.I. 2017/1206).
  • Page 123 AFL4-W10/W12/12/W13-EHL Panel PC FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and ◼ This device must accept any interference received, including interference ◼...
  • Page 124 AFL4-W10/W12/12/W13-EHL Panel PC Appendix Safety Precautions Page 123...
  • Page 125 AFL4-W10/W12/12/W13-EHL Panel PC WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the AFL4-W10/W12/12/W13-EHL. B.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
  • Page 126 AFL4-W10/W12/12/W13-EHL Panel PC ▪ If considerable amounts of dust, water, or fluids enter the device, turn off the power supply immediately, unplug the power cord, and contact the AFL4-W10/W12/12/W13-EHL vendor. ▪ RTC battery safety precautions: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion...
  • Page 127 AFL4-W10/W12/12/W13-EHL Panel PC ▪ Wear an anti-static wristband: Wearing a simple anti-static wristband can help to prevent ESD from damaging any electrical component. ▪ Self-grounding: Before handling any electrical component, touch any grounded conducting material. During the time the electrical component is handled, frequently touch any conducting materials that are connected to the ground.
  • Page 128 AFL4-W10/W12/12/W13-EHL Panel PC cords. When you need to dispose of your display products, please follow the guidance of your local authority, or ask the shop where you purchased the product. The mark on electrical and electronic products only applies to the current European Union Member States.
  • Page 129 AFL4-W10/W12/12/W13-EHL Panel PC B.2.2 Cleaning Tools Some components in the AFL4-W10/W12/12/W13-EHL may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the AFL4-W10/W12/12/W13-EHL.
  • Page 130 AFL4-W10/W12/12/W13-EHL Panel PC Appendix Watchdog Timer Page 129...
  • Page 131 AFL4-W10/W12/12/W13-EHL Panel PC NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working. The system may stop working because of external EMI or software bugs. The Watchdog Timer ensures that standalone systems like ATMs will automatically attempt to restart in the case of system problems.
  • Page 132 AFL4-W10/W12/12/W13-EHL Panel PC NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown. EXAMPLE PROGRAM: ;...
  • Page 133 AFL4-W10/W12/12/W13-EHL Panel PC Appendix Hazardous Materials Disclosure Page 132...
  • Page 134 AFL4-W10/W12/12/W13-EHL Panel PC D.1.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).
  • Page 135 AFL4-W10/W12/12/W13-EHL Panel PC D.1.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 壳体 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11364-2014 與 GB/T26572-2011 标准规定的限量要求。 Page 134...

This manual is also suitable for:

Afl4-w12-ehlAfl4-12-ehlAfl4-w13-ehl

Table of Contents