Table of Contents
Advertisement
Quick Links
GB110A SERIES
20V BATTERY INSTALLATION TOOL
GAGE BILT
MADE in USA
ORIGINAL INSTRUCTIONS
GB110A SERIES
GB110A
Includes (1) VP1086
GB110A/2
Includes (2) VP1086
GB110A-4AH
Includes (1) VP1357
GB110A/2-4AH
Includes (2) VP1357
GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE
E-MAIL US FOR A DISTRIBUTOR NEAR YOU.
(2Ah Battery)
(2Ah Batteries)
(4Ah Battery)
(4Ah Batteries)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gage Bilt GB110A Series
Summary of Contents for Gage Bilt GB110A Series
- Page 1 Includes (1) VP1086 (2Ah Battery) GB110A/2 Includes (2) VP1086 (2Ah Batteries) GB110A-4AH Includes (1) VP1357 (4Ah Battery) GB110A/2-4AH Includes (2) VP1357 (4Ah Batteries) GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT MADE in USA...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Page Warranty ..................................... 3 Description and Technical Specifications ..........................4 Description of Functions ................................5 Warnings ..................................... 6 Principle of Operation ................................7 How to set-up the GB110A ..............................8-10 How to use the GB110A ................................11 Maintenance ..................................... -
Page 3: Warranty
WARRANTY Seller warrants that all goods covered by this catalog will conform to applicable specifications and will replace or repair, EXW our plant, any goods providing defective from faulty workmanship, or material, for 1 year from date of shipment Said warranty to remain in effect if, and only if, such goods are used in accordance with all instructions as to maintenance, operation and use, set forth in manuals and instruction sheets furnished by seller. -
Page 4: Description And Technical Specifications
It has a 1.181” (30 mm) fastener setting stroke and a rated pull load of 5,395 lbs. (24 kN). NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE ORDERED SEPARATELY. (Contact Gage Bilt for more nose assembly options). -
Page 5: Description Of Functions
DESCRIPTION OF FUNCTIONS Hanger Mandrel Collection Bottle Adapter Assembly Actuator Assembly Riveting Point Light (white LED) Battery Lock / Release Latch Battery with charging status indication Universal Quick Charger Images may not reflect actual tool GB110A 20V BATTERY INSTALLATION TOOL 8/18 REV 8/22... -
Page 6: Warnings
SAFETY WARNINGS OPERATING HAZARDS: TERMS AND SYMBOLS 1. Use of tool can expose the operator’s hands to hazards, including crushing, impacts, cuts, abrasions and heat. Wear suitable gloves to protect hands. 2. Operators and maintenance personnel shall be physically able to handle the bulk, - Product complies with requirements weight and power of the tool. -
Page 7: Principle Of Operation
PRINCIPLE OF OPERATION When the battery is connected to the tool, operation is controlled by a actuator to the motor. The GB110A incorporates an electronic actuator assembly to send a signal to the motor. When the actuator assembly is depressed, the gear on the motor spins the gear on the gear box assembly retracting the nose assembly collet. -
Page 8: How To Set-Up The Gb110A
HOW TO SET-UP THE GB110A WARNING: Only qualified and trained operators should install, adjust or use the installation power tool for all fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. WARNING: The users or the user’s employer should assess specific risks that could be present before each use based on their application. - Page 9 Thread collet adapter (110749) onto piston of tool and tighten. Thread adapter anvil (110750) to tool and tighten using wrench flats provided. Select proper nose assembly (Contact Gage Bilt for more information). Screw nose assembly onto adapter (110751). Follow instructions on nose assembly data sheet.
- Page 10 HOW TO SET-UP THE GB110A Cont. Additional Actuator Assembly (VP1316) functions: Note: The installation tool has two additional functions that are controlled with the actuator assembly (VP1316). Service position: Press the actuator assembly (VP1316) for five seconds (until the white LED on the tool starts to flash (1 /sec) and release again.
-
Page 11: How To Use The Gb110A
HOW TO USE THE GB110A WARNING: Only qualified and trained operators should install, adjust or use the installation power tool for all fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. WARNING: The users or the user’s employer should assess specific risks that could be present before each use based on their application. -
Page 12: Maintenance
DAILY MAINTENANCE WARNING: Do not use tool if switch is defective. WARNING: Keep installation tool out of the reach of children when not in use. WARNING: Maintenance personnel MUST read and understand all warnings and cautions. WARNING: Disconnect battery before performing maintenance, cleaning or when replacing worn or damaged components. Severe personal injury may occur if power source is not disconnected. -
Page 13: Troubleshooting
TROUBLESHOOTING Providing all maintenance conditions have been met, follow this systematic approach to diagnosis. 1. INSTALLTION TOOL STOPS AND A RED LED COMES ON. a.) Fasteners are used beyond the specified performance capability of the tool. Wait until the LED goes out and press the actuator assembly (VP1316) briefly again. -
Page 14: Parts Lists
GB110A/2-4Ah SHOWN ABOVE **Adapter Assembly (110751) (28) includes: 110749 (28a), 110750 (28b), 211102 (28c) & 240102 (28d). Apply blue Loctite® #242 to threads of piston on tool and on male threads of adapter-anvil (110750) before installation. GB110A SERIES GB110A Includes (1) VP1086... -
Page 15: Nose Assembly Selection Chart
GB110A ACCESSORIES Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) STRAIGHT OFFSET NOSE ASSEMBLY SELECTION CHART (Sold Separately) (Sold Separately) GB110A - SELECTION CHART FASTENER DIA. STRAIGHT OFFSET... - Page 16 This page intentionally left blank GB110A 20V BATTERY INSTALLATION TOOL 8/18 REV 8/22...
-
Page 17: Alternate Tools / Accessories
Rivet nuts M4-M10, M3/M12 Optional, Blind rivets 3/32” (2.4 mm) thru Rivet studs M4-M8 1/4” (6.3 mm) diameter. Contact Process Monitoring Gage Bilt for nose assembly options. LOCTITE® IS A REGISTERED TRADEMARK OF HENKEL CORPORATION. GB110A 20V BATTERY INSTALLATION TOOL 8/18 REV 8/22...
Need help?
Do you have a question about the GB110A Series and is the answer not in the manual?
Questions and answers