Table of Contents
Advertisement
There should be no spaces in the WAV file name.
It is necessary to enter username and password to perform this operation, by default:
User: egi
Property ID: 1234
We can also use the "Audio File Navigator" option in the TOOLS menu to manage audio files.
In server mode, the SIP VoIP Client serves simply as a repeater.
The VoIP call made to this computer is forwarded to all computers that are configured to respond to the Multicast
streaming configured in the mixer. This allows you to make VoIP calls to groups without having to have a PBX.
In most cases, it would be better to set up the module as a PBX directly.
52.
www.egiaudio.com
–
With PBX: You need to connect to a PBX to work, it is the most common mode of use.
•IP PBX:
IP address of the PBX.
•
Registration time: How long you need to register on the PBX. If we do not want it to be pre-registered,
we must assign a value of 0. For our PBX mode and for 3CX switchboards it must have a value -1.
User: Name with which the equipment is identified in the PBX telephone exchange. It is also the name with which
the computer responds in a VoIP call.
Key: Key configured on the PBX for that extension. Default:
Answer Zone Name: If this check box is selected, the computer responds to the call with the zone name.
Otherwise, respond with a beep to indicate that you can speak.
–
Language: Allows you to configure the language in which we will reproduce the name of the area.
On ding-dong: Audio that will sound in the area when you receive a VoIP call. Multicast channels do not have
ding-dong, being continuous audio. To load Ding-Dong files on your computer: Search the browser for the disk
drive: "\\EGi-1111-XXXX\dindon" and then load chips in WAV format or extension.
WAV file: Allows you to select the file that will play as ding-dong.
Final Ding-dong activated: Audio that will sound in the area when the VoIP call ends.
Final WAV file: Allows you to select the file that will play as the final ding-dong.
Priority level: In server mode it will be used to determine whether or not a particular message from the message
scheduler will interrupt the audio from this source. The assigned value must be between 0 and 12, with 0 being
the highest priority value.
mysecret
Advertisement
Table of Contents
