EGi 1111 Configuration Manual page 31

EVENTS
Allows you to create events by clicking the "Add" button. When you do this or edit an existing event, the following
screen appears:
Given the number of parameters to be configured, they are divided into different tabs. Depending on the event type
and activation logic selected, different configuration tabs will appear on the screen.
GENERAL
Activate: We change whether the event is active or not.
Name: Name given to the event.
Type: Event class. Maybe:
– Message: Pre-recorded message.
– Output: Activation or deactivation of an output.
– Playlist: Launch or stop a playlist.
– Command: Launch command to EGi audio service.
Priority level: Determines whether it takes precedence over other audio services that are active (for messages
only). The assigned value must be between 0 and 12, with 0 being the highest priority value.
Activation logic: Determines whether event activation occurs by:
– Time.
– Entrance.
– Time or ticket: Any of them launches the event.
– Time and entry: Deben give both to launch the event.
31.
www.egiaudio.com