Table of Contents
Advertisement
INPUT CONTROL
Select which control input will trigger the analog input service.
If we introduce the audio by PIN_IN, but the input control is set to RELAY_IN, we will not hear audio until the
RELAY_IN contact is closed.
PRIORITY LEVEL
This level will determine whether it takes precedence over other audio services that are active. The assigned value
must be between 0 and 12, with 0 being the highest priority value.
When two services have the same priority, it is important to keep in mind that the 1st that arrives in time will
always be activated, or the one that is activated at that moment will be maintained.
24.
www.egiaudio.com
If we select PIN_IN, the audio will be heard when it detects continuous in the signal PIN_IN, with respect to mass 4.
If we select RELAY_IN, the audio of the input will be heard when the external contact between the RELAY_IN and
4 strip is closed.
If we select ANY_IN, the audio will be heard when either of the two above conditions is met.
Advertisement
Table of Contents
