Table of Contents
Advertisement
ADVANCED SETTINGS
The synchronous option must match the server configuration, or we won't receive the audio stream.
42.
www.egiaudio.com
Multicast Channel IP Address: Multicast audio IP address that you will hear. If we want to receive Unicast audio
(only between two computers) this will be the IP address of the source computer.
Port: IP port used to send the audio.
Latency: Added delay to compensate for delays in the network. If it is high, it improves synchronization between
multiple zones. It also allows you to add delays to compensate for physical distances between speakers.
Synchronous: Whether or not we use a synchronization protocol
Codec: Codec used to compress the Multicast audio channel. The L16 provides CD-like quality (16 Bits-44.1 KHz
without compression), while the PCMA (G711 A-law) and PCMU (G711 U-law) codecs occupy less bandwidth at
the expense of worse audio quality.
Priority Level: Determines whether it takes precedence over other audio services that are active. The assigned
value must be between 0 and 12, with 0 being the highest priority value.
Advertisement
Table of Contents
