Table of Contents
Advertisement
3.3.2.Network Configuration
In the "Local Network" section, you can configure the necessary parameters to establish a local network.
PROTOCOL - Allows you to configure the protocol to be used between 2 options: Automatic and Manual, as detailed below.
Automatic: Protocol established by default on the computer, takes by default the network configuration automatically
from a DHCP service. The DHCP server is a server that receives requests from clients requesting an IP network
configuration. The server will respond to such requests by providing the parameters that allow clients to self-configure.
Manual: Allows you to configure the different parameters in a personalized way obtaining greater control over the equipment.
Section 3.3.2.1 provides the steps to manually configure the appliance with a fixed or static IP.
3.3.2.1.Configuring the computer on a static or fixed IP
The manual protocol must be configured using the following steps.
1. Within the GENERAL menu, in the "local network" section of the "Network" option, we will select Manual protocol
and the network configuration parameters will appear.
2. In IPv4 address, type the static IP address on our network.
3. In IPv4 netmask normally place the numbering 255.255.255.0
4. At the gateway enter the Gateway address of the LAN network that connects our network section to the rest of the world.
5. In DNS-server, enter the value supplied by the internet provider. If you do not know the value or if it is not
provided by the internet provider, it is preferable to use the value 8.8.8.8, since otherwise, the equipment will
not be able to access the internet for time servers and / or radio stations.
6. After filling in these fields, you must save your changes.
In order for our team to communicate with others on the same stretch of network, they must all have the same
IPv4 Netmask. In different sections, the router must route the Multicast traffic.
17.
www.egiaudio.com
Advertisement
Table of Contents
