7.Cliente Audiolink - EGi 1111 Configuration Manual

4.1.1.7.Cliente Audiolink

It allows you to receive an Audio link channel from the network, with very simple configuration and possibility of
audio synchronism. It is a simplified version of the Multicast.
To do this we must activate in the service control the box "Audiolink client", Save changes, and when these changes
are made, enter the CONFIGURATION menu, option "Audiolink client".
To configure it, the channel number must be completed, which must be a value between 1 and 100.
To use synchronism, we must use this service, since the Multicast client does not allow us to use synchronism.
It can be used simultaneously with the Multicast client, as long as the same channel is not configured on both.
SIMPLE SETUP
Allows you to configure the following parameters:
Channel number: Audio link channel used (between 1 and 100).
Priority level: Determines whether it takes precedence over other audio services that are active. The assigned
value must be between 0 and 12, with 0 being the highest priority value.
41.
www.egiaudio.com