Maintenance/Repair; Safety; Observe The Tightening Torques - Ingersoll-Rand GHH RAND SILU CS104 Operating Manual

4 Maintenance/repair

4.1

Safety

NOTE
Also observe the safety instructions in Chapter 2 on page 12.
WARNING
COMPRESSED AIR IN THE SYSTEM!
There is a risk of injury due to pressurized components and lines.
‣
All checks and maintenance tasks must only be performed with the compressor switched off and
depressurised.
‣
Remove the ignition key from the towing vehicle.
CAUTION
HOT MACHINE PARTS!
During operation, the compressor is very hot. There is a risk of burning on hot machine parts.
‣
Wear protective gloves.
NOTICE
CLEANING USING A HIGH-PRESSURE JET!
When cleaning a silo vehicle using a high‑pressure jet, there is the possibility that water will ingress
into the interior of the compressor and the air filter.
‣
A distance of 0.5 m must be maintained.
‣
If necessary, empty or clean the air filter.
‣
In order to prevent corrosion, after cleaning, the compressor must be briefly operated (approx.
10 minutes).
4.2

Observe the tightening torques

The tightening torques are specified in the following chapters.
WARNING
INCORRECT TIGHTENING TORQUE!
An incorrect tightening torque can endanger the secure attachment of the compressor, or result in
damage to components due to excessive tightening torque.
‣
The specified tightening torques must be observed.
47757786 A
Maintenance/repair
21