Operation; Safety During Operation; Initial Commissioning - Ingersoll-Rand GHH RAND SILU CS104 Operating Manual

Operation

3 Operation
3.1

Safety during operation

NOTE
Also observe the safety instructions in Chapter 2 on page 12.
DANGER
RISK OF EXPLOSION!
For the conveyance of combustible, dust‑like materials, the temperature of the compressed air at the
measurement point directly before contact with the material to be conveyed may not exceed the maxi‑
mum value of 120 °C.
‣
If the maximum temperature is exceeded, switch off the compressor immediately.
CAUTION
NOISE GENERATION!
A greater acoustic pressure level can result in damage to hearing.
‣
Wear hearing protection.
CAUTION
HOT MACHINE PARTS!
During operation, the compressor is very hot. There is a risk of burning on hot machine parts.
‣
Wear protective gloves.
NOTICE
OVERHEATING DUE TO EXCESSIVE RUNNING TIME!
Exceeding the max. running time results in tangible damage due to overheating.
‣
Adhere to the max. running time: 3 hours running time and a subsequent 1 hour pause.
NOTICE
OVERHEATING DUE TO EXCESSIVE OPERATING PRESSURE!
Exceeding the max. operating pressure results in tangible damage due to overheating.
‣
Do not operate the compressor at an operating pressure of more than 2.5 bar.
‣
In the event of operating at high altitudes, adapt the operating pressure.
‣
If exceeded, switch off the compressor.
3.2

Initial commissioning

Initial commissioning of the compressor is usually carried out on the premises of the system manu
facturer.
It includes removing the preservation, filling the oil tank and checking the direction of rotation.
14
47757786 A