Installation Requirements - QSFPTEK S5300-24T4X Quick Start Manual

Abbrev
Grounding column
POWER

Installation Requirements

Tools Preparation
Screwdriver

Static-proof wristband

Bolt

Ethernet cable

Other Ethernet terminal devices

Control terminal

Safety Principles
Keep dustless and clean during or after the installation.

Put the cover at the safe place.

Put tools at the right place where they are not easily falling down.

Put on relatively tight clothes, and fasten the tie or scarf well and roll up the sleeve, avoiding stumbling the machine box.

Put on the protective glasses if the environment may cause damage to your eyes. Avoid incorrect operations that may cause

damage to human or devices.
Site Environment
Make sure that the workshop is well-ventilated, the heat of electrical devices is well-discharged .

Avoid to damage devices by following the electrostatic discharge prevention procedure. S5300-24T4X Hardware Installation

Manual.
Put the machine box at the place where cool air can blow off the heat inside the machine box. Make sure the machine box is

sealed.
www.qsfptek.com
Name
The grounding column
AC power supply
v1.0
Description
The grounding column must be fine.
Input voltage: AC100~240V
4 / 10