Table of Contents
Advertisement
Instructions
Dispensit 710
Depending on valve configuration, this valve can be used to dispense the following:
Acrylics, Conformal Coatings, Epoxies, Lubricants, RTV Silicones, Silicone Oils, Solder
Flux, Solder Mask, UV Curables
Dispense Valve
100psi (0.69 MPa, 6.9 bar) Maximum Air Working Pres-
sure
1200psi (82.7 bar) Maximum Material Inlet Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
332094C
EN
Advertisement
Table of Contents
