Syscmd_Get_Info; Syscmd_Get_Boot_Status - Siemens SIMATIC RF1000 Operating Instructions Manual

Programming
7.3 Programming via the RS232 interface (using the Freeport protocol)
Byte
3 ... 4
5
7.3.2.2

syscmd_get_info

Max. reader response time: 50 ms
Table 7-24
Byte
0
1
2
3 ... 4
5
Table 7-25
Byte
0
1
2
3
4
5 ... 45
46
7.3.2.3

syscmd_get_boot_status

Max. reader response time: 50 ms
Table 7-26
Byte
0
1
2
56
Value Description
0x00 Parameter length (0 bytes)
0xC2 Optional checksum (when the value "0x1C" is set in byte 0)
Request telegram
Value Description
0x0C Without checksum
0x1C With checksum
0x00 DevCode of the command set containing the command to be called.
0x04 CmdCode of the command to be called.
0x00 Parameter length (0 bytes)
0xC5 Optional checksum (when the value "0x1C" is set in byte 0)
Response telegram without errors
Value Description
0x0C Without checksum
0x1C With checksum
0x00 DevCode of the command set containing the command to be called.
0x04 CmdCode of the command to be called.
0x29 Parameter length (e.g. 41 bytes)
0x00
0x01 ... Firmware version of the reader, date of manufacture as ASCII value
Example:
1100 IDE Z 1.02.00 09/18/18 43025112
0xXX Optional checksum (when the value "0x1C" is set in byte 0)
Request telegram
Value Description
0x0C Without checksum
0x1C With checksum
0x00 DevCode of the command set containing the command to be called.
0x05 CmdCode of the command to be called.
Operating Instructions, 05/2023, C79000-G8976-C432-10
SIMATIC RF1000