Siemens SIMATIC RF1000 Operating Instructions Manual page 31

The rewritable configuration cards are supplied in packs of five. Two of the supplied cards are
unwritten, while three cards are written with sample configurations. These are identified
by the corresponding labels on the rear of the configuration card. You can also order
configuration cards with preset, customer-specific configurations. To do this, please contact
Service & Support (Page 93).
You will find more detailed information on the configuration card in the configuration manual
"SIMATIC RF1000 (https://support.industry.siemens.com/cs/ww/en/ps/24223/man)".
VHL functions
VHL stands for "Very High Level". VHL functions have a higher priority and are valid for
all card systems supported by the reader. The card system-specific details are in the VHL
functions of a configuration. By using VHL functions it is possible, for example, to change
the card system without having to adapt the code to the application - provided that the
configuration stored in the reader has been adapted accordingly.
Identification card for LEGIC systems
When using encrypted LEGIC systems/cards, you need an identification card to transfer reader
configurations to the reader. For this purpose, contact the project owner or the original
project supplier.
SIMATIC RF1000
Operating Instructions, 05/2023, C79000-G8976-C432-10
Commissioning
31