Honeywell Home Wi-Fi Series User Manual page 53

System setup
(See page 48 for instructions.)
Function
3
Heating Fan
Control
5
Heating Cycle
Rate
6
Heating Cycle
Rate Stage 2
12
Manual/Auto
Changeover
See page 47 for
more information.
Settings & Options
0 Gas or oil heat: Use this setting if you have a gas or oil heating
system (system controls fan operation).
1 Electric heat: Use this setting if you have an electric heating system
(thermostat controls fan operation).
Gas or oil furnace: Standard gas/oil furnace (less than 90%
5
efficiency).
9 Electric furnace: Electric heating systems.
Hot water or high-efficiency furnace: Hot water system or gas
3
furnace (more than 90% efficiency).
1 Gas/oil steam or gravity system: Steam or gravity heat systems.
0 Manual changeover (Heat/Cool/Off).
1 Automatic changeover (Heat/Cool/Auto/Off). Automatically turns on
Heat or Cool based on room temperature. Note: System maintains
minimum 3°F difference between heat and cool settings.
51
69-2803ES—05