Page 1
Henny Penny Electronic Bun Warmer Model BW-4 Model BW-4/3 Model BW-6 Model BW-8 SERVICE MANUAL...
Page 3
During this time, any frypot that fails due to manufacturing or workmanship issues will be replaced at no charge for parts, labor, or freight. Henny Penny will either install a new frypot at no cost or provide a new or reconditioned replacement fryer at no cost.
Model BW-4/BW-4/3/BW-6/BW-8 Henny Penny Electronic Bun Warmer SAFETY The instructions in this manual have been prepared to aid you in learning the proper procedures for your bun warmer. Where infor- mation is of particular importance or is safety related, the words NOTICE, CAUTION, or WARNING are used.
Page 6
Model BW-4/BW-4/3/BW-6/BW-8 OPERATING AND PROGRAMMING INSTRUCTIONS Due to the lower temperature settings, this unit has been designed to hold NON-POTENTIALLY HAZARDOUS FOOD ONLY. This unit will NOT hold potentially hazardous food at a safe temperature 1. Turn power switch to the ON position.
Model BW-4/BW-4/3/BW-6/BW-8 SPECIAL PROGRAMMING 1. With POWER switch off, press and hold both the UP and DOWN buttons, and then turn the POWER switch on until “SP” shows on the display. Release the UP and DOWN buttons, and “ F” or “...
Door-(BW-4/3) 54071 Rack / BW-4 ( Jack in the Box Only ) 55124 Rack / BW-4 Pass Thru ( Jack in the Box Only ) 44461 Rack - SN: CX048JB and below 24621 Sheet Metal Rack - SN: CX049JB and above...