Table of Contents
Advertisement
quit
Syntax: quit
Description: Under remote management mode, quit the CLI and continue run CM.
reset
Syntax: reset [cleanall]
Description: Reboot the cable modem. If there is no parameter, CM would just reboot. Otherwise,
if the parameter is "cleanall", CM would do a factory reset. ex. "reset cleanall" would do a factory
default reset.
scanmode
Syntax: scanmode <0|1>
Description: Enable or disable scan mode.
script
Syntax: script
Description: show RG script information.
sniff
Syntax: sniff [u|d|u+d] <time> [0|1] [syslog server IP|syslog server FQDN]
Description: Display the upsteam and/or downstream data packets in simple or long format for the
specified time. ex. sniff [u|d|u+d] <time> <0|1>. ; u: upstream, d: downstream, time, in second.
0|1: display format "0" or "1". To send sniff message to syslog server, supply with additional
server parameter.
telnet
Syntax: telnet <server IP> <port number>
Description: Telnet Client to log into another telnet server from CM. ex. telnet <IP_address>
tracert
Syntax: tracert <destination IP | destination FQDN>
Description: Utility to display routing information, from RG to destination host.
tuner
Syntax: tuner <frequency in MHz>
Description: Program tuner frequency (Mhz).
!
Syntax: !
Description: Execute the last command.
cls
Syntax: cls
Description: clean terminal screen.
help
Syntax: help
Description: Display the whole command set of the current menu.
exit
Syntax: exit
Description: Quit to the upper menu or to the console.
- 34 -
Advertisement
Table of Contents
