Show Information Commands - SMC Networks SMC8511 Install Manual

A.5 Show Information Commands
config
Syntax: config
Description: Display DOCSIS configuration file.
dhcpShow
Syntax: dhcpShow
Description: Display DHCP client's Ip, MAC and status.
dir
Syntax: dir
Description: List available modem software versions.
hwcounters
Syntax: hwcounters
Description: Shows system counters.
ipcable
Syntax: ipcable
Description: Print the cable modem IP address.
macaddr
Syntax: macaddr
Description: Display Cable MAC address.
phystatus
Syntax: phystatus
Description: Display status of PHY.
pktcount
Syntax: pktcount < LAN(0), WAN(1)> [purge]
Description: Packet counts for LAN or WAN. To set all counters to zero, supply with additional
parameter "purge".
snr
Syntax: snr
Description: Show DS and US power and downstream SNR.
status
Syntax: status [syslog server IP | syslog server FQDN]
Description: Display current CM state or send to syslog server.
sysUpTime
Syntax: sysUpTime
Description: Show system uptime.
ucd
Syntax: ucd
Description: Display current UCDs.
vendor
Syntax: vendor
Description: Vendor information.
- 32 -