Page 1
4087 Walden Avenue Lancaster, NY 14086 (716) 685-4040 f(716) 685-1010 www.airtek.com Airtek DB1000 Instruction and Programming Manual Portable Dew Point Monitor...
Page 2
4087 Walden Avenue Lancaster, NY 14086 (716) 685-4040 f(716) 685-1010 www.airtek.com Table of Contents: Section Introduction Receiving & Inspection Contents Mechanical Installation Depressurization Sample Air Line Installation Probe Installation Diagram Monitor Installation Placement Probe Cable Connection Operation Connect power Open Ball Valve Setup and programming Setup and programming Menu structure...
Page 3
Introduction The Airtek DB1000 Remote Dew Point Monitor measures dew point in the range –148º F to +68º F. The current output is standard and factory set at 4- 20mA. The DB1000 operates as a 4-20mA transmitter providing a linear analog output to the external remote monitor.
Page 4
4087 Walden Avenue Lancaster, NY 14086 (716) 685-4040 f(716) 685-1010 www.airtek.com Diagram 2.4 Monitor Installation Placement Place the monitor in an area where the dew point is to be read. Because a 10’ cord has been provided, the monitor must be within 10’ of the probe / transmitter.
Page 5
4087 Walden Avenue Lancaster, NY 14086 (716) 685-4040 f(716) 685-1010 www.airtek.com Operation Connect Power Plug in the monitor using the 6’ 3 prong plug. Open ball valve After power has been provided to the monitor, open the ball valve on the sample airline to supply sample air to the probe / transmitter.
Page 6
4087 Walden Avenue Lancaster, NY 14086 (716) 685-4040 f(716) 685-1010 www.airtek.com Press the Enter / Ack button, at any time, to accept a setting or Menu button to exit without saving changes, Main Menu The main menu consists of the three most commonly used functions; Setup, Program, and Password.
Page 7
4087 Walden Avenue Lancaster, NY 14086 (716) 685-4040 f(716) 685-1010 www.airtek.com 11) Press button 4, inp 2 appears, press button 4, and it should read 20.0 12) Press button 4, dspl 2 appears, press button 4, using buttons 2, & 3 will change the number and position change display until it reads 68.0.
Need help?
Do you have a question about the Airtek DB1000 and is the answer not in the manual?
Questions and answers